str95tsi submitted a new DSM Profile :

95 talon tsi awd how about you


Read more about this vehicle here...

Looking at getting rest of the parts to finnish the build in the next 2 weeks. Here's a sneek peek... Hope yall like the pictures

Here's my set up...
..Bake and Blastengine block Clean all parts for assembly
Wiseco HD 2 7-bolt 8.5:1
Oliver Billet steel 150mm rods

7-bolt H Rod Bearing
7-bolt H Main bearing set
Bore & Hone cylinder
Polish Crankshaft
Balance I4Balance rotating assembly for Inline 4 engine
Hang Pistons Flo...Hang
BlockDeck Inline engine Clean engine blockFreeze plugs
Balance shaft bearings
ARP 7-bolt main stud set
Align Hone engine block Assemble
4G63 short block Force Engineering ZFG Short Block

Machine rod Machine oil squirter in connecting rod set
Kiggley Street Beehive springs& retaineretainer set
3 angle valve job
Force Engineering 4G63 port work (Stage 1)

Deck Cylinder HeadLevel and cut cylinder head
Assemble DOHC head
Supertech 1mm over Intake valve
Valve stem seal set
Bead blast & hot tank cylinder head
Exhaust stud set
Supertech Exhaust Valve Standard size
Kiggly HLA
Street&Strip 4g63 head (stage1)




Stubby Shaft
Castle plug
Balance shaft spacer
Tensioner Pulley
Idler pulley
92 94Tensioner
Strait cut oil pump gears
Force ISF oil pump gear finish water pump
timing belt
3 gen lifter set
Labor to complete long block assembly from short block
APR custom aged 625+ 7-bolt head stud set

4G63 gasket kit
Fel-Pro Perma Torque HG

Mail oil galley plug
7-bolt core short block
7-bolt core cylinder head
ATI balancer
Fidanza adjustable cam gears
Gate's Kevlar timing belt
Kelford 272 cams
FP ported GREEN turbo

FP ported exhaust manifold

Punishment racing 02 housing with external tial waste gate

Megan 3" exhaust

I hope i didn't forget anything

Just thought id Mencken i ordered a few parts from extreme psi this week.
With any luck I'll have the new parts by Monday...
I'll take pictures and post them here Tuesday.
Here's the goodies....
Tial 50mm blow off valve.
MAGNUS fuel rail.
Walbro 450lph fuel pump.
Aeromotive A1000 13101 fuel pressure regular.
Aeromotive fuel pressure gauge 0-100 psi
Innovate motorsports MTX-L wide band.
Zaklee corp clear cam gear cover
ECM Link V-3 with boost control solenoid.
Mishimoto racing thermostat
Fuel Injector Clinic 1650cc high-Z
Fuelab 828 series in-line fuel filter 8AN inlet/ outlet 10 micron filter and 40 micron i got both filters
Hallman pro boost cotroller kit

I got a few new parts today.
Only thing left is the clutch and some sensors and wiring.

getting the car ready

I finally found a good place to put the Aeromotive 13101 FPR.
The 8an fuel filter from fuelab didn't fit in the stock location. so im going to weld up a pice onto the stock bracket on Wednesday.

Love all the parts pics - looks like Xmas morning. Thanks for including us in the build. Keep up the good work!

kiggly said:

Love all the parts pics - looks like Xmas morning. Thanks for including us in the build. Keep up the good work!

Click to expand...

I love the HLA and the valve springs and retainers i got from you guys.

Heres what i did for the fuel filter bracket to fit where the stock one sat.


I cut the stock bracket with a grinder and put washers in place to space it away from the break lines. then got longer bolts from jerry's. Also used scrap steel from coyote steel.
Cost less than $10.
I'll Post agine next week to show how it looks on the car and probably paint it.

cleaned wheel wells a while ago. Found rust and rubber . So i sanded it down and rattle can painted it.

Rust is car cancer so it had to be dune at some point.

Fuel filter in stock location for under $10.
I recommend this to anyone before putting it under the car.
Looks great and should stay clean.

Now i need a clutch fast like yesterday.
I wanted to use the south bend ss-x Kevlar/ceramic Clutch. But i didn't see overnight or next day shipping on the tmz website.
Anyone know where i can get this clutch kit fast?

I ordered the clutch from tmz.
South Bend Clutch DSM SS-X Clutch Combo w/ Ceramic/Kevlar Dual Friction Clutch Disk Kit

just an update sorry its been a while.

we're just using the old valve cover to keep out FM and dust. But i used the act street light flywheel.

new valve cover shaved 10AN fittings welded and sonic cleaned. Pluss its not cracked like the old one and it's the some color as the block, fuel filter, blow off valve and waste gate.

This project is starting to move along now thanks to Garage 808 in Eugene. So far im happy with they're work.

its finally coming together

had the shop weld on an fittings walbro 450 LPH fuel pump install