The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

waste gate/alternator clearence

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

My PR O2 housing puts the 38mm EWG in the same place, right on the alternator, and it was only after I installed the Fluidyne harmonic damper. My fix was just buying a bigger alternator belt so it dropped it down a bit, out of the way of the wastegate.
 
I went with the alt relocation. But I do plan on replacing the the manifold down the line. The o2 is pr, mhi 16g, and tial wastegate so the manifold is surely the weak point there. Thanks for the help
 
Why not get a bigger alternator belt so you can move the alternator down a bit more, below the wastegate? $8 fix or a $175 fix + the install which requires pulling the IM.
Because the solution hadn't crossed my mind untill after I installed the alternator relocation. Also I feel like the relocation my help going through alts in the future
 
Another solution would be to buy the newer tial wastegate. They are significantly smaller. I bought the punishment racing bundle, with wastegate already attached, and had no issues with fitment. But I also have a fp manifold.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top