willwonderlama
Probationary Member
- 18
- 0
- Jul 24, 2011
-
Fairmont,
West_Virginia
Long story short, couple years ago timing belt broke and trashed the valves. Fast forward to now replaced head with one from my parts car a 92 1gb auto awd. Go to fire car up after head swap and no power to ECU just cranked no fire. Replaced bad ecu with one from 92 parts car after swaping pin 6 and 14 and after some other set backs i.e. Clogged injector bad coil pack and few other small unrelated items.
Now to the issue at hand. At idle it runs pig rich 11-10 afr and leans out 14-15 with slight rpm increase where it is supposed to be when crusing. The SAFC2 settings have not been touched, before the timing belt miss hap ran like a raped ape and afrs where they need to be. Other then the 2g maf, front o2 sensor, and coolent temp sensor what are some other things to check. Also having a difficult time locating the correct specs for said sensors. In the process of making a blt can not locate mine right now.
Also could perhaps the ecu from the 92 car be the issue since it was from a auto even though I have a SAFC2 to tune with. Need this thing out of my garage I have boat worth a heck of a lot more that needs to be in there.
Mods in profile feel free to ask for clarification on anything and thanks in advance.
Now to the issue at hand. At idle it runs pig rich 11-10 afr and leans out 14-15 with slight rpm increase where it is supposed to be when crusing. The SAFC2 settings have not been touched, before the timing belt miss hap ran like a raped ape and afrs where they need to be. Other then the 2g maf, front o2 sensor, and coolent temp sensor what are some other things to check. Also having a difficult time locating the correct specs for said sensors. In the process of making a blt can not locate mine right now.
Also could perhaps the ecu from the 92 car be the issue since it was from a auto even though I have a SAFC2 to tune with. Need this thing out of my garage I have boat worth a heck of a lot more that needs to be in there.
Mods in profile feel free to ask for clarification on anything and thanks in advance.