The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support Rix Racing

What housing can I use?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I got them up on the phone and they said if its a TD06H housing they have those in stock but if its not the H I'm out of luck. So I need to take the housing off and measure the wheel to determine what it is.

Ok so I finally got to measuring the wheel and it is a TD06 wheel.

I spoke with FP again today and they found a few left. I'll be getting it tomorrow.
Well call me confused-as-f*ck. :p
 
I called FP on 9/18/15. They said they only had the TD06H housing. Last Wednesday, I measured that I have a TD06 wheel. I called FP again last Friday and they said after they got off the phone with me the first time, they went and checked around and found 4 TD06 housings left. I am buying one of those 4 today.
 
I'm still confused why you bought a new housing. If your externally gated (which I think was clarified) just remove the flapper and port as Justin said. As long as there are no cracks thru to the outside this will work especially if your on a budget.

To expand on Jus' comments, simply put, the TD05 and TD06 turbine wheels are different. The 06 is of course larger diameter. Therefore, Again as Jus stated, you could get a TD05 housing and open up the diameter to fit the 06 wheel.

Can I have the old housing?
 
I'm still confused why you bought a new housing. If your externally gated (which I think was clarified) just remove the flapper and port as Justin said. As long as there are no cracks thru to the outside this will work especially if your on a budget.

To expand on Jus' comments, simply put, the TD05 and TD06 turbine wheels are different. The 06 is of course larger diameter. Therefore, Again as Jus stated, you could get a TD05 housing and open up the diameter to fit the 06 wheel.

Can I have the old housing?
I'm internally gated.
 
I called FP on 9/18/15. They said they only had the TD06H housing. Last Wednesday, I measured that I have a TD06 wheel. I called FP again last Friday and they said after they got off the phone with me the first time, they went and checked around and found 4 TD06 housings left. I am buying one of those 4 today.
Ah, there we go. I was hung up on the fact that they said they didn't have any 06 housings but suddenly did.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top