The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Rix Racing

Resolved 2G A/T Plug Wire Color Help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DogWhistle

Supporting VIP
1,030
586
Sep 13, 2012
St. Paul, Minnesota
Over the past few years, I'd like to think we've been of help to several fellow 'Tuners members, but now we need your help:

We had the auto trans on our '99 Spyder rebuilt using, among many new parts, a new solenoid harness and solenoids. One of the two, four-wire plugs that sit next to each other on the top of the trans was broken, so we put on a new plug by removing the old pins from the harness and back into a new plug.

We're concerned that the order of the wires might have gotten changed during the process.

Will someone please look at the color sequence on your 2G auto trans and tell us the correct color sequence?

Thank you so much for your help.
 
This is what the '98 FSM shows. These are as if you are looking at the back side of the connector.

[1][2]
[3][4]

A-103: ELC 4-Speed Automatic Transaxle Control Solenoid Valve (black connector)
1: Blue w/ Yellow to TCU pin 43
2: Red to TCU pin 44
3: Gray to TCU pin 41
4: Orange to TCU pin 42

A-104: Pulse Generator (grey connector)
1: Black to TCU pin 14
2: White to TCU pin 1
3: Green to TCU pin 2
4: Red to TCU pin 15
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top