The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Morrison Fabrication

manley rod bolt torque specs

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

white7g

Probationary Member
24
0
May 7, 2015
Charleston, South_Carolina
Im assembling my motor and im using manley h beam rods with arp 2000 rod bolts if you look on manleys website it says 60 ft lbs after soaking in 30w oil. if you look at arp website it says 40 ft lbs using arp lube very confused as this is a very important part of an engine build. what do yall suggest?
 
Do as the instruction say. If you're using 30w oil 60ft-lbs & 40ft-lbs with arp lube. It's all in the lube.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top