ALL PRICES ARE OBO! I am flexible just make me an offer, thanks.

Turbo/Gauges/Boost:
- Genuine MHI EVO3 16g Turbo (Internally gated): $480
- GReddy electronic EGT Gauge: $80
- AEM Tru-Boost Controller w/ AEM 5bar external sensor: ($300 controller) + ($150 sensor) $200
- AEM Electronic Boost Control Solenoid: $60
- Greddy BOV Type RS (sounds great!): $100
Fuelling:
- Walbro 255lph HighPressure fuel pump: $50
- 6AN SS Fuel line: $30
- Billet 6-AN Inline Fuel filter: $30
- Areomotive Fuel Rail: $95
- Areomotive FPS set at 43.5psi: $80
- Denso 660 injectors: $300

Engine:
- Fully built 6-bolt 4g64t cast iron longblock: $2500 (with parts listed below) only 1k miles on rebuild!
- OEM 6-bolt 4g63 crankshaft: $300
- Eagle H-Beam Rods: $360
- ARP crankshaft bolts: $60
- ARP rod bolts: $40
- ACL Bearings: $40
- 6-bolt Wiseco Forged Pistons 8.5:1 w/ 0.020 overbore: $450
- STM Balance Shaft eliminator kit: $60
- MLS Headgasket: $140
- MLS exhaust manifold gasket: $33
- SS Turbine Housing Gasket: $30
- HKS Intake + Exhaust Camshafts 264/264: $450
- ARP HeadStuds torqued to 90ft/lbs ea: $70
- Valve Job
- Ported 1g 4g63t head: (done myself but could cost you $300 for just the porting) $300
- Dual valvesprings
- v3 hydraulic lifters

-Ported EVO 3 Exhaust Manifold: $250
- EVO 3 O2 Exhaust housing set: $120
- BSE Kit 1g turbo: $50
- SS Turbo oil supply line: $55
- 3" 1g AWD Short Evo O2 housing DP: $120
- 3" High flow cat: $80
- Flowmaster 50 with reduced tip for stealth appearance. $50

- 1g 24"x8"x3" FMIC Intercooler kit with couplers: $390
- 1G Aluminum Fluidyne Radiator (turbo): $190
- GReddy Radiator Cap: $20
- GReddy Catch Can Kit: $70
- Gates Racing Timing Belt: $110

- OEM 1990 DSM Air/Oil Cooler: $80
- 8AN Oil lines and fittings: $50
Transmission:
- Recently rebuilt OEM 5-speed transmission: 900
- New Clutch Fork and Fulcrum Ball: $65
- ACT 2100lbs Pressure Plate/Street Disc w/ ToB: $135
- XACT 6-bolt Chromoly Flyywheel 11.25lbs! $180
- SS Braided Clutch Flex Line: $20
- Complete Solid Shifter bushing kit: $40
- New shifting linkage bushings: $30
DriveTrain:
- Stock 4-bolt LSD rear differential: ('90 year only): $700
- Aluminum transfer case: $500
- 5x114.3 17x8 EVO8 Rims with 235/45/17 tires: $300

you still have the EVO8 Rims and tires?

GymHobo said:

ALL PRICES ARE OBO! I am flexible just make me an offer, thanks.

Turbo/Gauges/Boost:
- Genuine MHI EVO3 16g Turbo (Internally gated): $480
- GReddy electronic EGT Gauge: $80
- AEM Tru-Boost Controller w/ AEM 5bar external sensor: ($300 controller) + ($150 sensor) $200
- AEM Electronic Boost Control Solenoid: $60
- Greddy BOV Type RS (sounds great!): $100
Fuelling:
- Walbro 255lph HighPressure fuel pump: $50
- 6AN SS Fuel line: $30
- Billet 6-AN Inline Fuel filter: $30
- Areomotive Fuel Rail: $95
- Areomotive FPS set at 43.5psi: $80
- Denso 660 injectors: $300

Engine:
- Fully built 6-bolt 4g64t cast iron longblock: $2500 (with parts listed below) only 1k miles on rebuild!
- OEM 6-bolt 4g63 crankshaft: $300
- Eagle H-Beam Rods: $360
- ARP crankshaft bolts: $60
- ARP rod bolts: $40
- ACL Bearings: $40
- 6-bolt Wiseco Forged Pistons 8.5:1 w/ 0.020 overbore: $450
- STM Balance Shaft eliminator kit: $60
- MLS Headgasket: $140
- MLS exhaust manifold gasket: $33
- SS Turbine Housing Gasket: $30
- HKS Intake + Exhaust Camshafts 264/264: $450
- ARP HeadStuds torqued to 90ft/lbs ea: $70
- Valve Job
- Ported 1g 4g63t head: (done myself but could cost you $300 for just the porting) $300
- Dual valvesprings
- v3 hydraulic lifters

-Ported EVO 3 Exhaust Manifold: $250
- EVO 3 O2 Exhaust housing set: $120
- BSE Kit 1g turbo: $50
- SS Turbo oil supply line: $55
- 3" 1g AWD Short Evo O2 housing DP: $120
- 3" High flow cat: $80
- Flowmaster 50 with reduced tip for stealth appearance. $50

- 1g 24"x8"x3" FMIC Intercooler kit with couplers: $390
- 1G Aluminum Fluidyne Radiator (turbo): $190
- GReddy Radiator Cap: $20
- GReddy Catch Can Kit: $70
- Gates Racing Timing Belt: $110

- OEM 1990 DSM Air/Oil Cooler: $80
- 8AN Oil lines and fittings: $50
Transmission:
- Recently rebuilt OEM 5-speed transmission: 900
- New Clutch Fork and Fulcrum Ball: $65
- ACT 2100lbs Pressure Plate/Street Disc w/ ToB: $135
- XACT 6-bolt Chromoly Flyywheel 11.25lbs! $180
- SS Braided Clutch Flex Line: $20
- Complete Solid Shifter bushing kit: $40
- New shifting linkage bushings: $30
DriveTrain:
- Stock 4-bolt LSD rear differential: ('90 year only): $700
- Aluminum transfer case: $500
- 5x114.3 17x8 EVO8 Rims with 235/45/17 tires: $300

Click to expand...

I'm interested in the 6 bolt motor, would you be willing to ship? And where are located?