92AWDHX40
Supporting Member
- 13,554
- 1,498
- May 22, 2007
-
Kalamazoo,
Michigan
is there a place where everyone got all the parts, a online store.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Finally completely finished mine. 0 gauge from the alternator to battery and battery to distribution block. Also put a battery cut off switch behind the license plate.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Just pulling up a quick question, will I be safe to run 2Ga wire to my starter and alternator? Or should I return this wire and go with 1 gauge. I don't think it will be that big of a deal but I'd rather not waste my time. I've seen everyone do it a bit different. I'm running 2Ga from my box from the trunk to the front as it is, came with my Taylor box and kit.
My whole rewire is 2 gauge. It'll be fine.
Like stated above. I used the exact stepper bit. Bought it from lowes.How did you drill the 1 1/4 inch hole in the firewall? Sorry for all the questions I don't want any mistakes haha. Seems like a big drill bit.