Here is transmission part numbers we all need

twicks69 · Jun 28, 2015

Kelvin, the early 3/4 synchro you need is MD744782. It will work with 1990-1992.5 gears.

As well, on a side note, you were discussing using your 1990 FWD gears, be sure you use a matching intermediate shaft, output pinion shaft, 3rd and 4th gearset, and front diff ring gear. The profiles are a matched set for those parts. You can use the later year input shaft and 1st/2nd gears, and 5th gearset if you want with these other components. If you are going to use the 90-92.5 gearsets then you need to have the matching 3/4 shift rail and 3/4 shift fork to have the right roll pin orientation.

keltalon · Jun 28, 2015

Okay I have everything you mentioned all I need is the correct part number for 4th gear on the 1990-92 set. I am just going to get this set retreated. Thanks

twicks69 · Jun 28, 2015

The gear may be discontinued. The FWD 4th gear for gearset you have is one of three numbers:
MD730232 (should be the proper gear)
MD740769 (this one should work too)
MD742342 (I cannot confirm this one as its 1990.9-1992.5; it is likely the later gear tooth profile with small diameter synchro for MD744782 synchro)

Thats all the early part numbers.

keltalon · Jun 28, 2015

twicks69 said:
The gear may be discontinued. The FWD 4th gear for gearset you have is one of three numbers:
MD730232 (should be the proper gear)
MD740769 (this one should work too)
MD742342 (I cannot confirm this one as its 1990.9-1992.5; it is likely the later gear tooth profile with small diameter synchro for MD744782 synchro)

Thats all the early part numbers.

Thanks tim very helpful!

keltalon · Jun 29, 2015

keltalon said:
Thanks tim very helpful!

Okay here is a resource that will prove helpful. http://www.neoriginal.ru/cat/chrysler/part_89D_94/21M_896210000700_89621000700#ddtr_04

94awdcoupe · Jul 2, 2015

like that! where is the one for AWD?

keltalon · Jul 2, 2015

94awdcoupe said:
like that! where is the one for AWD?

You can navigate from here I am sending this from my cell phone I don't have a translator on the language to go further you can translate from a desktop and navigate to the transmission section http://www.neoriginal.ru/poisk_po_modeli/mitsubishi_39570_-_1964317

billiboosted · Jul 6, 2018

jeremy19984g63 said:
1G Manual Transmission Parts
-----------------------------------------------------------------
MD741558 3-4 shift fork
MB599879 clutch lever - cabin
MD173425 6 bolt AWD Flywheel
MD302074 Manual Transmission flywheel bolt
MD731948 Big Trans Staked Locking Nuts
MF241251 Pressure Plate bolts
MB484624 1990 AWD shifter cables

93-94 Transmission Parts
-----------------------------------------------------------------
Input Shaft Parts
5th Gear Roller Bearing: MD719137
3rd / 4th Gear Synchro Key: MD742445
3rd Gear Synchro: MD745479
4th Gear Synchro: MD745479
5th Gear Synchro Key: MD742441
5th Gear Synchro: MD744782
Input Shaft Rev Brake: MD746439
Outer Tapered Bearing: MD726235
Intermediate Shaft Parts
Intermediate Shaft: MD738952
5th Gear: MD742581
Lower Tapered Bearing: MD726236
Upper Tapered Bearing: MD736638
1st / 2nd Gear Synchro Key: MD742445
1st Gear Sychro: MD745477
2nd Gear Synchro (double): MD746435
Misc
32 mm nuts: MD731948

91-92 Transmission Parts
-----------------------------------------------------------------
Input Shaft Parts
3rd Gear Synchro: MD741198
4th Gear Synchro: MD741198
4th & 5th Syncho Key: MD742441
5th Gear Synchro: MD742541
Input Shaft Rev Brake: MD742051
5th and Rev Brake Key: MD742441
Outer Taper Bearing: MD726235
Intermediate Shaft Parts
Intermediate Shaft: MD738952
1st Gear Synchro: MD741644
2nd Gear Synchro: MD741645
1st & 2nd Synchro Key: MD742445
Inner Tapered Bearing: MD726236
Outer Tapered Bearing: MD736638
5th Gear: MD742581
Misc
Filter: MD738053
Wave Spring: MD744342

95+ Synchros
1st Gear Synchro: MD745477
2nd Gear Double Synchro: MD745896
3rd Gear Synchro: MD745479
4th Gear Synchro: MD745479
5th Gear Synchro: MD745892
Input Shaft Rev Brake: MD746439

2G Manual Transmission Parts
-----------------------------------------------------------------
MD719710 Driver side Front Diff Seal
MD707184 Pass side Front Diff Seal
MD730979 2g back up light switch (Switch M/T Gearshift)
MD711443 small breather vent, bellhousing
MD721764 large breather vent, bellhousing
MD718077 clutch release boot

Center Differential Parts (AWD M/T)
-----------------------------------------------------------------
MD738735 center diff housing
MD725878 center diff spider/side cross
MD737658 center diff washers (2 reqd)
MD733338 center diff spider and side gear kit
MD727551 center diff gear
MD727552 center diff gear bolt (8 reqd)
MD728248 center diff viscous coupler

I'm looking to replace my viscous coupler on my 98 eclipse gsx. This part number good for this year? MD728248

Canadian_CD9A · Jul 7, 2018

Don't pay for a brand new VCU (if they're even still available). Buy used.

billiboosted · Jul 8, 2018

Canadian_CD9A said:
Don't pay for a brand new VCU (if they're even still available). Buy used.

Why is that??

twicks69 · Jul 8, 2018

Because it is a limited inventory $300+ part. I can look into actual inventory nationwide if you need me to, part number is MD728248.

Chrysler / Mopar discontinued it, and I believe there might be a couple left in vintage parts warehouse for Mitsubishi.

zedicus · Aug 9, 2018

i couldnt find any new, i ended up paying 300$ to have one rebuilt.

http://www.dsmtuners.com/threads/rebuilt-coupler.514950/#post-153670950

Snaip · Jun 5, 2021

Hello all,

I hope this post will help some fellow DSMers, especially from Europe region, where the parts are a bit hard to find! Trust me, i am from Bulgaria and its really pain to find every bold and nut, one by one. Thanks God that International shipping exist

Currently I am rebuilding my 5 speed manual AWD transmission - KW5M332NPXV

Car is 1gb Eclipse D27, VIN 4A3CT64UXNExxxxxx

So here are all bearings and oil seals that I managed to find replacements. Many of the part numbers are updated (according year 2021). Of course on some positions, the only way is to go OEM supplied (not searching aftermarket by the oem Koyo/NSK manufactures).

On top is written the bearing towards clutch side and bellow it, is the passenger wheel side (towards 5th gear)

Please correct me if I written wrong information.

Bearings

<- clutch side

-> passenger wheel side

Input shaft:

OEM MD725282 - NSK HR 32205 ; replacement - Timken 32205B

OEM MD726235 - Koyo hi-cap 26118 YR1-N (inner race) Koyo hi-cap 26283-N (outer race) ; replacement - Timken X30306M

Intermediate shaft :

OEM MD726236 - Koyo hi-cap 303/28R (inner race) Koyo hi-cap 303/28 (outer race) ; replacement - same, but aftermarket - Koyo hi-cap 303/28R (inner race) Koyo hi-cap 303/28 (outer race)

OEM MD736638 - NSK TF R28-9g (inner race) NSK TF R28-9Ag (outer race) ; replacement - same, but aftermarket - NSK TF R28-9g (inner race) NSK TF R28-9Ag (outer race)

Output shaft:

OEM MD718322 - Koyo hi-cap 32009JR (inner race) Koyo hi-cap 32009JR (outer race) ; replacement - Timken SET1039 X32009X-Y32009X

OEM MD727861 - NSK R31Z-11g ; replacement - only OEM MD727861 - NSK R31Z-11g

Front differential:

2x OEM MD706566 - Koyo 6207 R ; replacement - 2x **** 6207 C 2Z

Central differential:

OEM MD727860 - NSK R41-1g ; replacement - Koyo hi-cap LM 300849 811 1b

OEM MD720623 - Koyo hi-cap LM 30081 ; replacement - Koyo hi-cap LM 300849 811

Needle bearings:

You can find only OEM parts

2x OEM MD737652 - 1st and 2nd gear

MD718033 - 3rd gear

MD749902 - 4th gear

MD719137 - 5th gear

MD718578 - transfer case shaft, out of production

Oil seals:

MD747660 - gear selector

MD723202 - transfer case shaft

MD741818 - input shaft

MD719710 - driver side axle (note that oil seal has orientation)

MD707184 - passenger side axle

MD739390 - input shaft rear end

The Top DSM Community on the Web

Here is transmission part numbers we all need

twicks69

keltalon

twicks69

keltalon

keltalon

94awdcoupe

keltalon

billiboosted

Canadian_CD9A

billiboosted

twicks69

zedicus

Snaip

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds