4gfun
Supporting VIP
- 2,009
- 55
- Dec 10, 2007
-
Ask Me,
Virginia
I have some parts that I'd like to sell or trade locally due to the risk of doing so online.
It pains me to even write this since no one ever posts here, but I figure I'd try.
I am going to post this in the DC and Richmond forums since I am in the Fredericksburg Area. I can meet around the Quantico MCB during the week to perform a trade or sale at my home in the Fredericksburg area. Generally not willing to drive to the Richmond Area to trade for small items.
I will update this list with parts that I have and parts that I want. It will start small and grow.
Thanks for looking.
Have for Trade or sale:
2 1g 91-92 FWD transmissions one good but 5th gear needs to be installed and one bad.
1 1g AWD transmission good but 5th gear needs to be installed.
rare 93-94 FWD axle set.
14b Turbo with no hot side. (Not sure if good, didn't notice shaft play).
TurboXS MBC
DNA Motoring MBC
Autometer Boost Gauge
SAFC (SOLD)
ARP Head studs for 6 bolt...installed but never run. $80
Profec B Spec 2....only the controller and the harness coming from it.
1g interior parts (poorly painted and paint peeling off).
1g Turbo EPROM ECU, unsocketed....good shape. (SOLD)
1g Turbo EPROM ECU, socketed works fine except inaccurate Coolant Temp sensor when using MMCD...traces repaired...not in great shape.
1g Turbo NON-EPROM ECU...needs all new drivers, once replaced the ECU will be fine.
1g Turbo EPROM ECU, socketed....all screwed up...broken traces galore.
Moates Ostrich v1.
2G EM Ported (has hole for EGT probe that needs to be plugged if not used)
1g TB Elbow
2g TB Elbow
1g Throttle body parts
1g Punishment Racing SMIC setup. (missing a few fittings and clamps).
Knockoff HKS SSQV.
1g long tube FMIC.
New Moog tie rod ends
XTD Stage 4 Clutch, Pressure Plate and Lightened Flywheel...unused...open box. 93-99 7 bolt FWD only. $230
Knockoff 1g Ebay Mishimoto radiator $80
Bad 1g 7 bolt Cylinder head...no compression on cylinder #1. Includes HLAs and roller rockers along with cam caps in the correct locations. Not including cams. Might have been a stuck HLA causing this but no guarantees. When scoped, cylinder #1 was stuck wide open due to some "metal flashing" holding it open. I have not been able to duplicate the problem but it doesn't mean the problem is not there. The flashing was gone when I pulled the head $150
It pains me to even write this since no one ever posts here, but I figure I'd try.
I am going to post this in the DC and Richmond forums since I am in the Fredericksburg Area. I can meet around the Quantico MCB during the week to perform a trade or sale at my home in the Fredericksburg area. Generally not willing to drive to the Richmond Area to trade for small items.
I will update this list with parts that I have and parts that I want. It will start small and grow.
Thanks for looking.
Have for Trade or sale:
2 1g 91-92 FWD transmissions one good but 5th gear needs to be installed and one bad.
1 1g AWD transmission good but 5th gear needs to be installed.
rare 93-94 FWD axle set.
14b Turbo with no hot side. (Not sure if good, didn't notice shaft play).
TurboXS MBC
DNA Motoring MBC
Autometer Boost Gauge
SAFC (SOLD)
ARP Head studs for 6 bolt...installed but never run. $80
Profec B Spec 2....only the controller and the harness coming from it.
1g interior parts (poorly painted and paint peeling off).
1g Turbo EPROM ECU, unsocketed....good shape. (SOLD)
1g Turbo EPROM ECU, socketed works fine except inaccurate Coolant Temp sensor when using MMCD...traces repaired...not in great shape.
1g Turbo NON-EPROM ECU...needs all new drivers, once replaced the ECU will be fine.
1g Turbo EPROM ECU, socketed....all screwed up...broken traces galore.
Moates Ostrich v1.
2G EM Ported (has hole for EGT probe that needs to be plugged if not used)
1g TB Elbow
2g TB Elbow
1g Throttle body parts
1g Punishment Racing SMIC setup. (missing a few fittings and clamps).
Knockoff HKS SSQV.
1g long tube FMIC.
New Moog tie rod ends
XTD Stage 4 Clutch, Pressure Plate and Lightened Flywheel...unused...open box. 93-99 7 bolt FWD only. $230
Knockoff 1g Ebay Mishimoto radiator $80
Bad 1g 7 bolt Cylinder head...no compression on cylinder #1. Includes HLAs and roller rockers along with cam caps in the correct locations. Not including cams. Might have been a stuck HLA causing this but no guarantees. When scoped, cylinder #1 was stuck wide open due to some "metal flashing" holding it open. I have not been able to duplicate the problem but it doesn't mean the problem is not there. The flashing was gone when I pulled the head $150
Last edited: