The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

97 Talon TSI

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Just installed a Fp race manifold with ceramic coating. However, disappointed with the coating as if barely hit it with anything ( bolts or wrench) it's chips off. Waiting on my turbo from Jus, a billet 16g, and also my open dump on housing from STM. Will be ordering fic 1120cc injectors and fuelab filter to run E85. Also, need to install the Fuelab 515 reg with install kit I have.
 

Attachments

  • car.jpg
    car.jpg
    311.3 KB · Views: 94
Type1DSMr updated 97 Talon TSI


View updates to this DSM profile...

Painted my valve cover purple with VHT. Turned out pretty good for my first paint, still have to polish the letters. Decided to go with a purple and black theme going to be getting rid of the couple of red hoses for black ones. Also, ngr is selling me a purple top to switch out the green one. They said they don't normally sell the tops separately, so thanks for being an awesome vendor and taking care of my needs.:thumb:
 

Attachments

  • 20150912_014342.jpg
    20150912_014342.jpg
    249.2 KB · Views: 109
More parts!!!! Stm o2 open dump housing, Stm 3" intake kit, and a billet Evo 3 16g turbo. Tomorrow I should receive my fuelab filter kit with 40 micron filter, so should be good to go for e85. Gonna try to install everything this weekend or by the next week. Also thanks Stm for the free license plate holder, kinda made my day. :hellyeah:
20150917_170445.jpg
 
Well tear down has begin, but I looked at some of my bolts and they are crappy so I have to place another order to get some more o2 housing and downpipe bolts. I've installed the Fuelab filter with 40 micron but of course the bracket doesn't do much good, so have to make one. Going to be removing all the old hoses as well for the new hose kit from OHM Racing.
20150919_174253.jpg
20150919_171131.jpg
 
Finally got the car back together and running.:D Going to be working on the tune for pump gas, only until the tank is empty than to E85. So far I got it to idle pretty well with the Fic 1120cc injectors and I did a boost leak test to 20 psi, but anything over I get a small leak at the intake manifold to the afpr (zip ties ain't cutting it LOL). Also gave her a quick bath
20151006_182943.jpg
20151006_182955.jpg
My son decided to help clean her. What a great boy!
20151006_183051.jpg
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top