can some one send me a link for the correct compressor that works for valve springs for our head? ive tried like 3 different tools with no luck due to the springs being recessed in the block. im trying to install them not remove, so preferably a tool that works very easy for the sake of the keepers as they are a pain in the A$$

This
http://www.euroexportinc.com/mitsubishi-4g63-valve-spring-compressor

And this is how you use it

UrbanSmoker said:

This
http://www.euroexportinc.com/mitsubishi-4g63-valve-spring-compressor

And this is how you use it

You must be logged in to view this image or video.

Click to expand...

thanks

I bought one of those Euroexpert compressors man (thanks for the recommend once again Kyle) thing's brilliant!! never going with out one again.
Just be careful to lube the bolt threads really good. You might also find the keepers will stick a lot, if the head off the engine use some brake clean on the keepers as the engine oil acts like a suction cup.

I use this with the head off http://www.motosport.com/product?ps...qV-8lvUldOhas9VXNzoLcaNMt_LUFXDNplBoCNejw_wcB
With the head on the car I made a tool that is basically a pry bar with a washer on the end, then a "bridge" across the cam towers.

And as always Jafro has an excellent video that is beyond helpful and insightful

thanks for the vid.