The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

1G Using Mitsubishi starions FMIC

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sjd6795

Proven Member
614
121
May 14, 2014
Wilsonville, Oregon
I have two stock mitsubishi starion FMIC and I'd like to know if anyone has ever fabbed it up to fit a 1g. It's larger then the stock sidemount so performance should be better, and it's smaller then an aftermarket front mount so fitting it shouldn't be a problem. What do you guys think? Here is a picture.

You must be logged in to view this image or video.
 
They were not wildly popular in the day. The cost to get one to fit did not match the benefits. If you can make the mounts and piping yourself, then go for it. If you can do that, you might as well upgrade the straw-sized inlets (1.75 inches) to 2.0-2.5 inches. It is better than the stock side mount, but for the money, you could have a much better setup.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top