The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support ExtremePSI

on3 turbos

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jcorkin

Probationary Member
20
1
Feb 9, 2015
Hubbard, Nebraska
Anybody have experience with their turbos? Look like they might be of good quality and found one locally for what seems to be a good price its a .78 AR turbo with a .80 exhaust housing and says its good for up to 800hp
 
What's your setup in the car, 400$ new and it supports that much nah, egay, have fun spoolin it too, built head to enjoy the power band?

You must be new to the turbo world. There are a lot of LS and Mustang guys running these turbos, they are quite popular in the V8 world. I haven't heard of many failures, in fact I haven't heard of a single one yet that wasn't the turbo's fault, only improper installation and oiling. It probably won't support 800hp thru a 4 cylinder, but it will through a V8 that's making 400-500hp NA power already. Most of these guys run low boost, 7-16 psi max. There isn't much info on these turbos being pushed past that and it is concerning as increased boost pressure = increased shaft speed. Will it last at 25-35psi? Who knows. Maybe it worth a try. They seem legit, and better than the "ebay" branded turbos. They have a good reputation in the performance world. If these were junk they wouldn't be doing this type of work and they would never last in this business.

http://ls1tech.com/forums/conversio...erformance-ls1-swapped-foxbody-kit-build.html

http://ls1tech.com/forums/forced-in...oduction-new-turbo-system-details-photos.html

http://ls1tech.com/forums/forced-in...gle-turbo-build-thread-production-system.html

Many of these guys are running on3 turbos:

http://forums.corral.net/forums/tur...o-thread-post-your-dyno-chart-combo-here.html

http://ls1tech.com/forums/forced-induction/1542646-huron-speed-on3-turbo-5-3-dyno-results-vid.html
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top