I took apart my whole intake and coolant system to rebuild and modify and that was a month ago and I have 2 pieces I don't know what they are...

First, trying to figure out what this bracket is I think it was around the battery area but can't remember.


Second, is this tube. I know it used to hook to the old stock TB nipple, but i have a jeep TB now so i know its a vacuum line but I'm wondering what this tub is for first off. Second I deleted my EGR and have a nipple free on my intake vacuum tree, can I just connect this one to there and pull vacuum there? Thanks for the help.

I don't recall where that bracket is supposed to be, and I don't see it after a quick search in CAPS. The vacuum hose goes to the EVAP system. Since you already removed the EGR system, emissions must not be a concern (i.e. the car is for off road use only), so I'd recommend removing the EVAP system as well.

The bracket is the intake manifold brace it goes underneath the manifold attached to block.

inthemidst said:

The bracket is the intake manifold brace it goes underneath the manifold attached to block.

Click to expand...

Actually, I think it's the exhaust manifold bracket. Take a look at PNC 13007 here:

http://www.2gnt.com/CAPS/main15/main15sub310.html

The intake manifold braces don't look like that.