The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Rix Racing

1G aem ugeo

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blesi660r

Proven Member
37
7
Jun 13, 2013
north branch, Minnesota
I've done a lot of searching the last two days on here, first I know the ugeo does not pair with ecmlink very well and there are better widebands out there for us to use.

so my Q: I currently DO NOT have link, now I would like to hook this wideband up and I'm wondering how to go about doing so without link, do I wire it in like I have link and change the setting on the gauge to replace my front o2?
I guess I'm looking for a little clarification on what to do, I was getting a little overwhelmed with info.

thank you for any help or links to my questions,
 
If your wide-band supports narrow-band simulation, then it is fine to wire in as the front o2. The front o2 signal wire would be cut at the ecu leaving space to connect the 0-1v converted signal from your wide-band unit. Tape up the unused connector for the front the OE o2 sensor. Other then that, the wide - band should be straight forward to wire. Make sure you use a good ground and many suggest pulling power from the cig lighter.
 
Awesome thank you for the clear answer :) , my local forum couldn't help one bit LOL
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top