The GTR rebuild is going to be a little more involved and this DSM stuff is just sitting collecting dust.

All parts located in Sacramento, CA and are sitting ready to ship. Much of it in like new or new condition. All prices are OBO (to an extent) Not really looking for trades unless you have a few of the GTR parts i need or have a pre-smog era vehicle etc. I also have a nice firearm collection so those always peak my interest. For locals I can do payments, just gotta put down a deposit to hold it.

Built 2.3L Stroker Long Block: Manley rods and pistons with forged Eagle crank. Head has SuperTech HD Duals, just add cams/belt and roll - $2500 obo (add cams and gears and I'll toss in a blue kevlar gates belt ($150) for free.

Powder Coated JMF Drag manifold with 75mm FFTec TB (6 bolt) - $650

Quarter Master HD Gear drive twin dis - $800

Shep Stage 4 Transmission w/ Welded CD - $2100 (Or both for $2800)

FP4 Cams - $425

Fidanza Cam Gears - $125 (or both for $525)

FIC Blumax 1450s - $325

FIC 2150s w/ pigtails - $600

TIAL 60MM bov - $185

UICP - $150 (or both for $300)

1g AEM EMS - $500

Custom Billet 67/67 Holset (PTE 6766 equivalent) with 14cm T3 machined hot side 0 miles - $750

Ramhorn T3 w/ 38mm TiAL WG - $500 (or kit for $1200)

Valentine 1 radar detector - $350

I have plenty of pictures for buyers with cash in hand ready to buy now. I'm in no rush but extremely busy so if you won't have money "until next Tuesday" please don't message me until "next Tuesday".

Any miles on the motor?

It wont let me edit it so here goes,

"
The GTR rebuild is going to be a little more involved and this DSM stuff is just sitting collecting dust.

All parts located in Sacramento, CA and are sitting ready to ship. Much of it in like new or new condition. All prices are OBO (to an extent)

'91 Caged Black shell, race ready $OLD

Built 2.3L Stroker Short Block: Manley rods and pistons with forged Eagle crank. $1800 obo (For the right price I can include the ARPs, torqued once for free)

Built head $OLD!

Shep Stage 4 Transmission w/ welded center diff $2000 obo

Powder Coated JMF Drag manifold with 75mm FFTec TB (6 bolt) - $650

Quarter Master HD Gear drive twin dis - $OLD!

FP4 Cams - $425

Fidanza Cam Gears - $125 (or both for $525)

FIC Blumax 1450s - $325

FIC 2150s w/ pigtails - $OLD!

TIAL Q bov (Flows 60% more air than the old ones most have) - $185

UICP - $150 (or both for $325)

1g AEM EMS - $500

Custom Billet 67/67 Holset (PTE 6766 equivalent) with 14cm T3 machined hot side 0 miles - $OLD!

Ramhorn T3 w/ 38mm TiAL WG - $OLD!

Valentine 1 radar detector - $350

I have plenty of pictures for buyers with cash in hand ready to buy now. I'm in no rush but extremely busy so if you won't have money "until next Tuesday" please don't message me until "next Tuesday"."

Pipnorcali said:

Any miles on the motor?

Click to expand...

I only have the shortblock left now.

Tell me more about the Shep Stage 4 Transmission. I'm interested. Miles, condition, everything you can think of.

Much of the list is sold. I need to update it as soon as I can get some spare time.

The GTR rebuild is going to be a little more involved and this DSM stuff is just sitting collecting dust.

All parts located in Sacramento, CA and are sitting ready to ship. Much of it in like new or new condition. All prices are OBO (to an extent)

**COMPLETE down to the oilpan** Built 2.3L Stroker Short Block: Manley rods and pistons with forged Eagle crank. Will also come with waterpump and ported forward facing oil filter housing not to mention low millage on the timing components.. $1800 (I also can make a deal to include the ARPs and Head gasket (both only torqued once)

Shep Stage 4 Transmission w/ welded center diff $2000

Imported (low miles) EVO 3 Transmission and T Case $ (Best offer)

90mm Q45 TB with sensors and pigtail PNP $115 SHIPPED!

Auto (Possibly fits the manuals as well) BullFab Chromoly front crossmember $125

Fidanza Cam Gears - $125 SHIPPED!

Saturn Alternator High Output (New) with Jays Relocation kit $225 SHIPPED!

Saturn Alternator (used) $125 w/ pigtail SHIPPED!

FIC Blumax 1450s (Never seen E85) - $325 SHIPPED!

RC 1200s (Never seen E85)- $265 SHIPPED!

1g AEM EMS - $500 SHIPPED!

Valentine 1 radar detector - $350 SHIPPED!

_____

'91 Caged Black shell, race ready $OLD

Crinkle Coated JMF Drag manifold with 75mm FFTec TB (6 bolt) - $OLD!

Quarter Master HD Gear drive twin dis - $OLD!

FP4 Cams - $OLD!

Built head $OLD!

Ramhorn T3 w/ 38mm TiAL WG - $OLD!

Custom Billet 67/67 Holset (PTE 6766 equivalent) with 14cm T3 machined hot side 0 miles - $OLD!

Custom UICP - $OLD!

Walbro 450 - $OLD!

FFTec TB - $OLD!

TIAL Q bov (Flows 60% more air than the old ones most have) - $OLD!

FIC 2150s w/ pigtails - $OLD!

I have plenty of pictures for buyers with cash in hand ready to buy now. I'm in no rush but extremely busy so if you won't have money "until next Tuesday" please don't message me until "next Tuesday".

The GTR rebuild is going to be a little more involved and this DSM stuff is just sitting collecting dust.

All parts located in Sacramento, CA and are sitting ready to ship. Much of it in like new or new condition. All prices are OBO (to an extent)

**COMPLETE down to the oilpan** Built 2.3L Stroker Short Block: Manley rods and pistons with forged Eagle crank. Will also come with waterpump and ported forward facing oil filter housing not to mention low millage on the timing components.. $1800 (I also can make a deal to include the ARPs and Head gasket (both only torqued once)

Imported (low miles) EVO 3 Transmission and T Case $ (Best offer)

Auto (Possibly fits the manuals as well) BullFab Chromoly front crossmember $125

Saturn Alternator High Output (New) with Jays Relocation kit $225 SHIPPED!

Saturn Alternator (used) $125 w/ pigtail SHIPPED!

FIC Blumax 1450s (Never seen E85) - $325 SHIPPED!

RC 1200s (Never seen E85)- $265 SHIPPED!

Valentine 1 radar detector - $350 SHIPPED!

_____

'91 Caged Black shell, race ready $OLD

Crinkle Coated JMF Drag manifold with 75mm FFTec TB (6 bolt) - $OLD!

Quarter Master HD Gear drive twin dis - $OLD!

FP4 Cams - $OLD!

Built head $OLD!

Ramhorn T3 w/ 38mm TiAL WG - $OLD!

Custom Billet 67/67 Holset (PTE 6766 equivalent) with 14cm T3 machined hot side 0 miles - $OLD!

Custom UICP - $OLD!

Walbro 450 - $OLD!

FFTec TB - $OLD!

TIAL Q bov (Flows 60% more air than the old ones most have) - $OLD!

FIC 2150s w/ pigtails - $OLD!

90mm Q45 TB with sensors and pigtail PNP $OLD!

1g AEM EMS - $OLD!

Shep Stage 4 Transmission w/ welded center diff $OLD!

Fidanza Cam Gears - $OLD!


I have plenty of pictures for buyers with cash in hand ready to buy now. I'm in no rush but extremely busy so if you won't have money "until next Tuesday" please don't message me until "next Tuesday".