The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

Resolved Innovate 3873 DB or 3845 MTX-L for ecmlink

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The Innovate widebands play very nicely with ECMlink, so you'll be able to get it reading properly.

Yes, they come with two outputs which can be set for one wideband and one narrowband. However, with v3, you just need to input a wideband signal and the ECU can produce the simulated narrowband signal for you.
 
Ordered myself the mtx-l wideband. Thanks for all the help!:thumb:

I just installed my Mtx-l in front O2 housing last week and I really like it. Btw, in case you look up wideband installs be sure not to get confused with the LC-1. Make sure to use the yellow wire for NB simulation with ecmlink. It can be confusing because on the innovate LC-1 you would use the brown wire instead of the yellow.
 
I just installed my Mtx-l in front O2 housing last week and I really like it. Btw, in case you look up wideband installs be sure not to get confused with the LC-1. Make sure to use the yellow wire for NB simulation with ecmlink. It can be confusing because on the innovate LC-1 you would use the brown wire instead of the yellow.

Might you be referring to the tech article I wrote for the LC-1 install variations? If so, this isn't the first time someone has gotten them confused. I'm wondering if I should create another for the MTX-L (and any other variations Innovate has come up with).
 
Might you be referring to the tech article I wrote for the LC-1 install variations? If so, this isn't the first time someone has gotten them confused. I'm wondering if I should create another for the MTX-L (and any other variations Innovate has come up with).
I viewed your article and the info was clear. My problem was that I was looking at multiple install threads and got mixed up for a sec. It's odd that innovate switched the color of the output wires to the opposite. The other issue is ecmlink doesn't have MTX-L in the wideband options. I picked LC-1 and that worked for me. It's also difficult finding the correct switch point for the MTX-L. Thanks for creating that tech and I'm sure many others would like an updated guide if you have time.
 
Might you be referring to the tech article I wrote for the LC-1 install variations? If so, this isn't the first time someone has gotten them confused. I'm wondering if I should create another for the MTX-L (and any other variations Innovate has come up with).
A newer write up would great as I follow a lot of instructions from this site. Thanks again
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top