What did you do to your DSM today?

pksystems · Dec 22, 2014

Made wire harness' for gauges. Realized PO didn't have Water temp gauge hooked to anything. Just 12V/ground for some fancy blue lights. :hmm:

Made bracket to hold turbo timer to lower dash. Powdercoated TT bracket.

Gave A-pillar pod a couple shots of Krylon satin black.

pksystems · Dec 27, 2014

Installed gauge pods/gauges. Wideband sure was fun.
Mounted turbo timer.
Mounted EBC in glove box.
Wrapped wires under dash with electrical tape/zip-tied them out of the way.
Reinstalled airbag.
Installed leather e-brake boot.

97 eclenger · Dec 27, 2014

played with the engine harness. evo 8 ecu going in, so may as well strip whats not needed to run the car. and removed solder connections. Head work is next on the list

1990dsmkid · Dec 27, 2014

Removed front and rear strut bars, replaced battery and terminals. Next is to replace 3in intake pipe with stock one and remove fuel lab fpr and install stock one. Trying to get this car pretty much back to stock except for suspension, turbo, gauges, and exhaust. Just going to need to source a smic and piping then all should be done with it.

2ndGenOrDie · Jan 1, 2015

Getting ready to look at my passenger side suspension.... Was driving yesterday and my steering was really "weird" LOL

..... I'm thinking it's my tie rod. We'll see what's up with it

pksystems · Jan 1, 2015

Pulled clutch master cylinder.
Dis-assembled it and cleaned 18 years of gunk out of all the passages/reservoirs.
Put some of the steel brackets/clips into a vinegar bath in preparation for powdercoating.
Rebuilt it with OEM kit. Looks brand new.

buhay6 · Jan 1, 2015

Took my car out and beat the living piss out of it playing in the snow....litterly put away wet!

CrackedDSM · Jan 1, 2015

buhay6 said:
Took my car out and beat the living piss out of it playing in the snow....litterly put away wet!

You must be logged in to view this image or video.

DSM Dreamer · Jan 1, 2015

Drained a quart of oil to make room for some Lucas oil stabilizer to hopefully alleviate my low oil pressure at idle. Also squirted some WD40 into my evap purge solenoid in the hopes it will start working again.

pksystems · Jan 3, 2015

Rebuilt clutch slave cylinder with OEM rebuild kit.

Cylinder had green anodized piston. New one is blue. That's worth at least +10HP!!

o0GuitarKid0o · Jan 4, 2015

I replaced my fuel injectors in (-40) weather today in my driveway at night not fun, The tools were even colder but after what shoulda been 20 mins (took 1hr 30 min), My cars running like a champ again. Oh and i got a speeding ticket 246$, 15 km over but the officer can't write and spelt my name wrong so im gonna fight it! wish me luck.

buhay6 · Jan 5, 2015

o0GuitarKid0o said:
I replaced my fuel injectors in (-40) weather today in my driveway at night not fun, The tools were even colder but after what shoulda been 20 mins (took 1hr 30 min), My cars running like a champ again. Oh and i got a speeding ticket 246$, 15 km over but the officer can't write and spelt my name wrong so im gonna fight it! wish me luck.

That's definitely something I do not miss, working outside in winters a B*tch. Congrats on get'r done tho!
What I've found when ever getting pulled over is if you can pull over as soon as you know the cops coming after you, turn the car off, interior lights on, and have all the paper work ready to go before he even gets out of his cruiser. They usually really like that and charge under the minimum amount, I've yet to get a speeding ticket that's the set price + $1 for every Km/h over. My last one 2 years ago was $140, minimum charge is actually $185+. Usually if they spell your name wrong you'll win in court 9/10, good luck!

Critic4Du3ce · Jan 5, 2015

Cursed at her a lot.

Critic4Du3ce · Jan 5, 2015

You must be logged in to view this image or video.

o0GuitarKid0o · Jan 5, 2015

buhay6 said:
That's definitely something I do not miss, working outside in winters a B*tch. Congrats on get'r done tho!
What I've found when ever getting pulled over is if you can pull over as soon as you know the cops coming after you, turn the car off, interior lights on, and have all the paper work ready to go before he even gets out of his cruiser. They usually really like that and charge under the minimum amount, I've yet to get a speeding ticket that's the set price + $1 for every Km/h over. My last one 2 years ago was $140, minimum charge is actually $185+. Usually if they spell your name wrong you'll win in court 9/10, good luck!

Oh yeah not fun in th winter haha , I pretty much had everything ready I was going to work so it was early and still dark out I just pulled right over ( car running) and waited he wrote me a tickt and asked if I had any questions told him nope not my first ticket and he left then i noticed he spelt my name wrong and forgot the rs turbo thts on ,my registration so taylor was driveing a plqmouth laser when it shoulda been tayler driveing a plymouth laser rs turbo ( he acually put a q in plymouth) and a O instead of an E in my name

buhay6 · Jan 7, 2015

finally started looking into my over boosting issue.... I think I found it! actuator solenoid it seems to be! yay

.......wait.....10psi da fack! I wanna go vroom vroom!

pksystems · Jan 7, 2015

Cut the clutch hardline into 6 pieces for easy removal.
Pulled Brake Master Cylinder.
Pulled ABS prop valve.
Started trying to figure out this mess of ABS lines. (I will most likely cut them out tomorrow)

pksystems · Jan 9, 2015

Pulled oem fuel filter. Got it undone without damaging the fitting so I can use an-6 adapter. :hellyeah:

RollnOnBumpz · Jan 21, 2015

Mounted Hydraulic handbrake, Still got to plumb it in.

1990TSIAWDTALON · Jan 21, 2015

Ordered MORE parts LOL

.

mbyoung424 · Jan 21, 2015

Finished painting some parts on the porch while it snowed and hung them in the bathroom so they can dry at room temp.

pksystems · Jan 21, 2015

Jbwelded 1/4 NPT fittings into bottom of ebay catch cans.

Received my powersteering to AN-6 adapters.

Dfw_Dsm · Jan 21, 2015

ordered a fidanza flywheel, took bumper off to get it on the ramps for r&p, clutch change. and to put some other parts on it.

DSM Dreamer · Jan 21, 2015

o0GuitarKid0o said:
I replaced my fuel injectors in (-40) weather today in my driveway at night not fun, The tools were even colder but after what shoulda been 20 mins (took 1hr 30 min), My cars running like a champ again. Oh and i got a speeding ticket 246$, 15 km over but the officer can't write and spelt my name wrong so im gonna fight it! wish me luck.

Damn the man! He probably just pulled ya over cuz he's (or she's) jealous that they don't have a DSM! Good luck in court!

o0GuitarKid0o · Jan 22, 2015

DSM Dreamer said:
Damn the man! He probably just pulled ya over cuz he's (or she's) jealous that they don't have a DSM! Good luck in court!

haha no kidding! and thanks hopefully they just throw it out cuz im Tayler Not this so called Taylor they caught speeding in my car LOL

The Top DSM Community on the Web

What did you do to your DSM today?

pksystems

pksystems

97 eclenger

1990dsmkid

2ndGenOrDie

pksystems

buhay6

CrackedDSM

DSM Dreamer

pksystems

o0GuitarKid0o

buhay6

Critic4Du3ce

Critic4Du3ce

o0GuitarKid0o

buhay6

pksystems

pksystems

RollnOnBumpz

Attachments

1990TSIAWDTALON

mbyoung424

pksystems

Dfw_Dsm

DSM Dreamer

o0GuitarKid0o

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds