95_gst_turbo
Proven Member
- 56
- 2
- Nov 20, 2014
-
weidman,
Michigan
So I've done some searching and I haven't had much luck.
Recently I've 6 bolt swapped my car. I'm running a 6 bolt bottom end with a 2g head.
The oil filter has 2 large AN fittings with no hose connected and I was wondering if anyone can help me on the routing.
Assuming one goes to the turbo and the other one will be for coolant and the other will be for oil , but which is which?
I also ordered new head bolts and they didn't come with washers. Can I just use M12 grade washers for this?
Thanks in advance[DOUBLEPOST=1416947297][/DOUBLEPOST]Hopefully the image uploaded. That's the 2 areas in unsure which is which
Recently I've 6 bolt swapped my car. I'm running a 6 bolt bottom end with a 2g head.
The oil filter has 2 large AN fittings with no hose connected and I was wondering if anyone can help me on the routing.
Assuming one goes to the turbo and the other one will be for coolant and the other will be for oil , but which is which?
I also ordered new head bolts and they didn't come with washers. Can I just use M12 grade washers for this?
Thanks in advance[DOUBLEPOST=1416947297][/DOUBLEPOST]Hopefully the image uploaded. That's the 2 areas in unsure which is which
Attachments
Last edited: