studabaker
Supporting Member
- 207
- 2
- Nov 1, 2008
-
Sacramento,
California
second time this leak has occurred. I have a polished crank and cleaned block with over sized bearings. It seems that maybe oil flow through the engine is being impeded or not flowing right? I replaced the rear main seal which was beyond my abilities as a novice. there were minor holes in the sealing part against the crank. It is dripping from my oil filter which I already fixed from the position sensor. I pulled it and put sealant around it. That has never leaked on me before. I must have put something back together wrong when I rebuilt it my self because I am an amateur at this and going from instructions I am finding without actual mechanic training.
What could I have rebuilt wrong that would cause the rear main seal to pop and the crank position sensor to pop?
What could I have rebuilt wrong that would cause the rear main seal to pop and the crank position sensor to pop?