ABS Delete Steel Braided Line Specs

white92tsi · Sep 17, 2014

Does anyone happen to know the approximate length of the steel braided lines that are needed to do an ABS delete on a 1g? I might have sourced a proportion valve from a non-abs car, but I need to have the lines made up. Also, is it recommended to do the 3AN -> metric fittings, or just get the lines made up with the metric fittings already crimped on?

Thanks!

Dsmkauai · Sep 17, 2014

There's a guy on the galant forum that sells ss braided brake lines for gvr4 and 1g. If you look in the for sale section you can find it. Let me know if you need help.

turbotalon1g · Sep 17, 2014

Check out SPA motorsports in IL, they are on facebook. Tell them Aaron from MN sent you.

224-440-1352

TheMadCheshire · Sep 23, 2014

I know you're not really asking this, but going with stock lines is super easy. If you've sourced the valve, why not the lines? You only need the left and right fronts and the 2 from the master. although easier with no intake manifold, it is completely doable with the entire engine in.

Dsmkauai · Sep 23, 2014

You can also buy the abs delete lines from jnz still! They just don't have any valves left, I was told I got the last one on the shelf! Lol

92AWDHX40 · Sep 23, 2014

find a valve a the local junk yard or call one or I see lots of part outs out there, besides here gotta think outside the box.

tmoney20g · Sep 23, 2014

white92tsi said:
Does anyone happen to know the approximate length of the steel braided lines that are needed to do an ABS delete on a 1g? I might have sourced a proportion valve from a non-abs car, but I need to have the lines made up. Also, is it recommended to do the 3AN -> metric fittings, or just get the lines made up with the metric fittings already crimped on?

Thanks!

If you don't want to go thru all the BS of figuring it out yourself, because JNZ already did:

http://www.jnztuning.com/product_info.php?cPath=21_27_677&products_id=3709

1G DSM ABS Delete Kit

***Big brake proportioning valves in stock as of 9/2014***

white92tsi · Jun 21, 2016

I wound up just buying some new straight hard line and bending it to fit. Easier than sourcing it, looks clean, and I was able to route it.

Thanks for the replies, guys.

The Top DSM Community on the Web

ABS Delete Steel Braided Line Specs

white92tsi

Dsmkauai

turbotalon1g

TheMadCheshire

Dsmkauai

92AWDHX40

tmoney20g

white92tsi

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds