ACWgraphics
10+ Year Contributor
- 47
- 0
- Jul 10, 2008
-
Farmington Hills,
Michigan
Swapping to a 6 bolt motor, can i use my 2g heads? manifold? intake? clutch?
Thanks in advance!
Thanks in advance!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You can use the 2g head but you have to drill the bolt holes larger to fit the 6 bolt head studs. If you are using a 2g head you can use the 2g intake manifold. The clutch is the same but flywheels ate different.
What about the 7 bolt internal parts? i.e. crank, pistons, rods? Would any of those be of use in a 6-bolt? Also the Exhaust manifold should be ok?
A little research would go a long way. As for internal parts, the only internal parts that are usable are the pistons, and you really don't want to press pistons off old rods and install on new ones when the price for a new set is so cheap.