The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

Need help

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The fronts will work, the spring rate might be a bit off. The rear will be different. The length of the rear struts are different.
 
I'd check this myself. I heard a rumor years ago the only difference is the spring rates. U can put agx and pro kit on gs, get, gsx... Is it optimal on all three? Impossible. But do they bolt up? My money says they do!

why are u doing this? Help me give u better advice... What parts were on your gs that you are trying to migrate to the gsx? Stock parts or what?
 
I'm not quit e surebwhat parts they are they were on the gs when I bought it an gave the car a slammed kinda look and wantedbto give the gsx thevsame look the gs is currently stripped down any garage and iv been using it as a parts car but pretty much there not going to work then?
 
I would personally just buy some new agx front strut and eibach springs. Not too expensive and will give it a great ride. Good luck!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top