The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Trans Bracket mount

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Zufelt

Proven Member
533
9
Oct 15, 2012
Lemoore, California
hello hello. Hey whats up guys I have a 95 GSX transmission auto that got shipped to me and during transit was dropped and the studs bent on the bracket that go into the passenger side motor mount. So I went to the junkyard and grabbed another one not knowing that the spider Trans Bracket is completely different. So now I'm trying to just swap the studs out is it possible? Do I take a flat head in hit it in between the bracket and the round part of the stud to pop them out any idea let me know thanks
 
I think I saw the post with the pictures you had. At least the brackets seemed to take the worst of the beating.

The trans bracket bolts appear to be pressed in -- like wheel studs. Although I have not had to do it, you can thread a bolt on the end of the stud and pound it out of the bracket.

Caution -- do not do this while the bracket is mounted to your transmission housing, or you may crack it. Take the bracket off and put it in a bench vice.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top