The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Morrison Fabrication

Any one tried fitting 3000gt front lower control arms to 1g dsm or gvr4?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

is there a specfic reason for this i know one of the rears work but i dont think the fronts do

The 3000gt lower arms are very beefy pieces & if they do bolt on they will be an upgrade as there designed to hold a big v6tt unit, im thinking the 94-99 facelift arms would be the ones to try (same slip on rear bushings as 1g/gvr4), alot of the bolts & nuts around the arm are same part numbers between 1g/gvr4 & 3000gt vr4 according to oem parts catalog, the front bushing bolt is the same m12x135 long, the ball joint nut is same m12 MS440003 part number, the dsm/gvr4 rear bushing would have to be used as the 3000gt one is slightly different shape from i can see in pictures

(also the 1g/gvr4 & 3000gt use the same oem sway links front & rear)
 
Last edited:
Why is an upgrade needed? Breaking a lot of front control arms? I'd rather keep them as light as possible. Measure from the front bushing to the ball joint. Maybe they give you some free camber?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top