The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Arkansas members

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I'm going back up there saturday. Tbh I completely forgot to look at the interior....I even forgot almost everything I needed. I did get a working ISC off of a 3000gt though. All I got. Had a splitting headache the whole time there xD and my ISC is no longer leaking. BUT....my injector o rings blew, I need 1 lower o ring and all 4 upper side. Does anyone have a pic of what the top look like with the o rings on? Mine had 2 each on top...
 
Happy 4th to you too! Now if only my beast was running LOL damn injector seals
 
I am getting close as well! I have the bottom end put together and just got the ARP headstuds in today. I hope to have the top end done this weekend and be putting her in next weekend. So far my build is a 2g 6 bolt stock build with a 16g. The only performance done to the car will be the ported manifold, 16g and a full 3" exhaust.
 
Anybody need brake parts?
I have slotted front AWD rotors, brake calipers brackets,

Also have AWD stock sway bar and springs.

Let me know before they end up in the metal recycling bin
 
Had to go and get my potato launcher replaced with a "stock" looking magnaflow muffler and tip for when I move to Massachusetts in a few weeks. Stupid law pertains to ANY car in Mass, including ones registered in other states just driving through.
The magnaflow muffler is even louder than my HKS Hi-power muffler that was on there. :banghead:

At least it "looks" stock LOL
 
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
I only have the dual piston caliper brackets. I am using the calipers. I did the Outlander brake upgrade where u keep the dual piston calipers and use the outlander bracket and rotor.
 
Soon to be moving and junking a few parts at the local metal recycling place:

-Caliper Brackets for AWD rotors
-AWD Sway bars
-AWD f\r springs
-2g intake manifold
-7bolt block, crank, pistons and rods (had plans for it, but plans changed) bear is spun and block is stripped bare
-stock cam gears
-cruise control
- front bumper impact supports
-etc...

Let me know if u want anything before Thursday 7/19
 
A meet? Now that's alot to ask for! Lol I'm down as long as it's not a weekend.
 
Im from Rogers, NWA area. There is a DSM page on Facebook called "Arkansas DSMs" if you guys are not familiar with it look it up and join. Lol I randomly found this thread because I was searching for outlander brackets! Haha.
 
It has been dead here the past month or so. I have been diligently working on getting the 6 bolt swap done in my 2g before the birth of my daughter and I have almost got it finished. I am buttoning it up with the small stuff at this point. hope I can hear her pur before Monday but I believe that to be unattainable due to waiting on my map sensor adapter and 2g MAS. I should have it done while on vacation next week.
You must be logged in to view this image or video.
 
Nice L7! It's coming along nicely I see. It's been tough to work on my car seeing as I don't Have a legitimate place to actually wrench on it. Makes my motivation to do it less and less. I'll be moving here soon though and plan on either getting a storage unit or a house with a decent garage so I'll actually have a place to do so.

And sorry Reviver. I did, let someone borrow them and never got them back unfortunately :-/
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top