The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Garnering Interest: 2GB Talon Front Lip

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ExtremeDimensions

10+ Year Contributor
120
0
Jan 13, 2011
SoCal, California
Hello,

So i know this subject has been brought up in the past, but would you all be interested in a front lip for the 2Gb talon front end? I'm thinking something simple similar to our 2gb eclipse front lip but modified to fill in the small portions where the talon bumper goes upwards?

EDIT #1:


Looking at this picture:
You must be logged in to view this image or video.



I was playing around with the idea of something similar to this:

You must be logged in to view this image or video.



Edit #2:

PRICING! For something like the mercedes style lip we would be looking at around 300 for Duraflex, and 500 For Carbon Creations. Those who put deposits on this first batch would be looking at lowered pricing, however it depends on how many people are willing to put up the cash!
 
Last edited:
I'm not sure how a 2gB Talon lip would be designed right to work with the existing contours of the rounded, pointy lower front bumper shape. Having a flat vertical face dropping down to a lip, like the 2gB Eclipse lip, would look a little off on a Talon. Maybe use something like the lips made for the E92 M3 as reference?

You must be logged in to view this image or video.


The shape just doesn't lend itself well to a lip in my opinion. If anything, the 1gA and 1gB would seem like better candidates, especially given the limited number of 2gB Talons out there.
 
Last edited:

Looking at this picture:
You must be logged in to view this image or video.



I was playing around with the idea of something similar to this:

You must be logged in to view this image or video.
 
i'll be more interested once i know how much these front lips are going to cost.
 
Pricing would vary depending on the design and what material being used. Carbon Fiber is going to be more expensive than Fiberglass based parts (Duraflex). a flat simple style would be less expensive to make a mold out of than a more detailed one like the Benz lip above.
 
You already know im in, let me know when you want the donation bumper to make this happen
 
I will keep watching this thread. I agree with what ludachris is saying. That side curve is going be tricky. Play around in photo shop or photo editing program to get a better idea. That benz is flat bottom. Are you going to sculpt it out of clay or foam?
 
The 2gb front bumper already sits so low, with a lip i would be scraping everything. I'd be more interested in some sort of a 2GB Talon rear bumper lip to make the rear end look lower.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top