pksystems said:

Before the end of summer. Which IC do you have?

I'm going to try to make them fit with the punishment racing fmic I have.

I've seen pics of them installed with that fmic, but I think they need some modding.

Click to expand...

Aight I'll know within the next probably month.

I'm putting together a water to air setup.

Joel

Silver/grey 1998 ESi sitting at 52nd Street Pick N Pull in Calgary

Pretty trashed grey cloth interior. Aftermarket Racing Pedals!!!!

Front & Rear bumpers look decent. Rear lights look good. Front light tabs are broken & repaired. Strakes are there, but car has damage on sides.

Has OEM F&R mudflaps which I thought were rare, but I just picked up some NOS off ebay for $15

Car is now missing front crash bumper impact foam.

lacombe alberta. 98 talon tsi awd. any meets in alberta?

I have a set of brand new megan racing coil overs and a set of dss stage 3*650hp* axles., Act 2900 6 puck sprung with fidanza flywheel in mint condition maybe 100kms on it. 1g mitsumoto rad in good condition some bent fins.

Both are for a FWD 1g

Asking 650$ for it all..... Coil overs are worth 1100$ ALONE, Axles another 900$.. HUGE SAVING

I got some parts off that 2g esi. Was a 1ga awd there that they crushed the next day!! Shame while I see other cars that have been,there for months.

Im also from Edmonton

I'm in AB for work now.

96 tsi awd at Barlow pick n pull in Calgary.

Looks like it HAD high end engine two days ago. Nothing left now... Cept for some dirty looking yellow coilovers.

I pulled them. $144 for four adjustable koni yellows with eibach coilover springs/sleeves. Good deal?

I think I paid more then PNP payed for the car.



Here is what I saw left on car.
** update***

Torque solutions urethane rear subframe bushings --> not TS.. Some poly insert over oem
Some diy poly front subframe bushings
Non abs brake prop valve --> meh... Its abs
Headlights --> drivers gone
Driveshaft (no rear diff)
Gas tank has 3 huge (an10?) Bulkhead fittings through sides of tank

Looks to be Koni yellows and ground control coil over.
Good deal imo.

Hey all! New to DSM's. Picked up a 93 Plymouth Laser AWD Turbo. Living in Calgary.
Anyone know where to get an ECU socketed in the Calgary area?

This weekend I was really hoping to get my 6 bolt onto my motor stand, but derp, I don't have bolts long enough to clear the stands arms.. It's a long shot but does anybody have the bolts they used that I can borrow?? Back to work monday so I was hoping to get a good start this weekend My research concludes they are M10s with a 1.25 pitch- crappy tire/ home depot doesn't carry them!

Anyone around Calgary have any 4g63 engine hoist brackets I can borrow for like a week? Almost ready to pull the engine, and the PO removed mine.

i might have 1.. 6 or 7 bolt? which side?

hmm.... is there a diff? It's for a 7 bolt. Both sides.....

Altho I've almost finished making some out of scrap angle iron. Still need to do some welding tomorrow tho.[DOUBLEPOST=1407787915][/DOUBLEPOST]These brackets I made should work ... I started to lift the entire car by them

Anyone around Calgary want some free cloth tan with pattern rear split seats out of a 97 tsi? Perfect if you have an ESi with tan single fold rear seat. I'd toss em in my ESi, but the interior is grey.

I'll throw them out by next weekend.

Eventually I'll also be disposing of the matching cloth front seats.

from Airdrie 94 talon

From Calgary. Own a 98 GST 2.3 stroked (Soon for sale after fresh paint) , Evo 1 (My baby) under the knife, and I daily a ralliart. I have tons of parts laying around from various motors, 6 and 7 bolt. Im also looking to sell or trade ECMlink V3 lite for 1G DSM. Ill take 500 OR trade for cams+.

97 ESi sitting at Barlow PNP in Calgary. Front bumper has some damage. Rear bumper looked good. Missing hatch cover (as usual) ... Lights all looked good. There is a mountain of floor mats near it. None of them seemed to fit good.

50% off everything till Sept 1st.

Picked up 2 sets of near new pantsaver floor mats for like $0.75 each.
We'll see what looks best with my new black carpet. Tan, or black mats.

I guess I won't be getting my awd project on the road before it snows.

TheMachinist said:

From Calgary. Own a 98 GST 2.3 stroked (Soon for sale after fresh paint) , Evo 1 (My baby) under the knife, and I daily a ralliart. I have tons of parts laying around from various motors, 6 and 7 bolt. Im also looking to sell or trade ECMlink V3 lite for 1G DSM. Ill take 500 OR trade for cams+.

Click to expand...

what Cams u looking for? I May Be interested in Link[DOUBLEPOST=1410218740][/DOUBLEPOST]

pksystems said:

I guess I won't be getting my awd project on the road before it snows.

Click to expand...

ya this weather sucks. Snow at the start of september!!! Need to get 1 of my dsms going for winter

Hey how stocked up are the pick'n pulls out there with 1g's? I'm thinking of making a trip out there for a day or two, its awful dry out here for DSM's.
I'm also looking for MK2 supra parts if anyone knows what they've got in stock out there.

pick'n'pull does have an inventory check online now. There's a black 1990 tsi there, I picked some stuff off it a couple weeks ago, drive line was all there, somebody got the turbo already. The motor was complete less the valve cover. body's rough. Pretty slim pickings tho man.

How fast is there turn around time for cars in the yard? do they stay there for a few months or is it a week or 2 and they're gone?
I'm just looking for a good black 1gb hood the drip rails that are as minty as possible and a few other odds and ends

P-N-P doesn't seem to have any planning for how long a car stays. Some cars are there for 8+months. Others cars are gone in 3 days.

Use the Row52 smartphone app and search by Eagle or Mitsubishi. Don't even punch in which model, cause they rarely have more then 3-4 of either. The app gives you more info on the car then the website. App will let you know which Trim/color/trans..etc...

Awesome thanks for the info man.