The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Rix Racing

1G Auto trans inhibitor switch

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SaulHudson

Proven Member
179
6
Nov 18, 2013
Alamogordo, New_Mexico
Factory trans car no swap.
I believe I have a problem with the inhibitor switch I have the following symptoms

The shifter has to be pushed up into park further to engage safety switch to start. It doesn't not engage the switch unless it is pushed.
No gears fwd or reverse gears.

The shifter Seems to work fine. Is there a way to bypass the switch? Are there any other possible causes?
 
The trans came out of car and car was apart for a long time.
The shifter cable was detached from trans and left in car the selector on trans came off.
So possibly

Also installed a trans lab shift kit at this time. Filled with 7-8qts of diaqueen ATF to include what was put in the TC. The dipstick reads fine.
 
Last edited:
You need to set the cable..Yull need an 1/8" drill bit to line it up..
You must be logged in to view this image or video.
 
Adjusted selector and cable as specified in that fsm. No luck.

Also pulled the shifter assy console apart. No gears still.
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top