Use an open end wrench and turn a little at a time.

If you don't plan on reusing the line then you and cut the line so you can get a full socket over it but other then that an open wrench will work with so PB blaster

Use some pb blaster first and let it soak if its hard to come off.

Line wrench is preferred and a crows foot better still

That's an oil feed. Take a 7/8th open end wrench and take it off. unscrew the other screw holding it on to the turbo.

Pyramid said:

That's an oil feed. Take a 7/8th open end wrench and take it off. unscrew the other screw holding it on to the turbo.

Click to expand...

7/16ths! not 7/8ths!

And keep the oil feed, it can come in hand

I have a spare if you break it and need one. When I took mine off I did it from the oil filter housing side and pulled it through. I believe there are one or two holding tabs on the block if I remember correctly. Good luck PB blaster is a must.

You need a wrech that looks like this: http://www.summitracing.com/parts/s...vRLjoEF6FQfSD8eFhXdO4FFlwbGXAEEca4hoCO8Lw_wcB

But 7/16 in size.

Ok thanks everyone

Pull the manifold and use a socket i do that everytime just spray pb on the mani bolts on the head

my oil feed line broke in the process i guess just where its old any idea where to buy new oil line and which one to order

jbeaton9292 said:

Pull the manifold and use a socket i do that everytime just spray pb on the mani bolts on the head

Click to expand...

I would love to see how you get a socket on that fitting.

nelliott500 said:

I would love to see how you get a socket on that fitting.

Click to expand...

O i thaught it was a banjo bolt like most sorry thanks for correction

Gsxxx said:

my oil feed line broke in the process i guess just where its old any idea where to buy new oil line and which one to order[/QUOT

Click to expand...

Gsxxx said:

my oil feed line broke in the process i guess just where its old any idea where to buy new oil line and which one to order

Click to expand...

What turbo are you replacing the t25 with?

Just get a -4an braided line and be done with it. Extremepsi/STM /etc.. sell oil feed kits with appropriate adapters.

heres one of a few offered: http://www.extremepsi.com/store/product.php?productid=17334&cat=1809&page=1

i ordered another t25 turbo from miller import parts for 250. Just for now im going to upgrade a little later.

Use Aerokroil as a penetrant. PB blaster is garbage. Most part stores sell it, it's in an orange aerosol can. Penetrates to 1 millionth of an inch. Has a "get the bolt loose guarantee"...

I have a braided oil feed for sale.

The stock oil feed is 2 pieces, it can be easier to disconnect it in the middle and remove the upper part with the turbo.

line wrench is the easiest way