The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

2G persistent minor clutch slip

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DSM Chase

10+ Year Contributor
778
51
Sep 19, 2011
Senoia, Georgia
Recently Installed a brand new act 2100 street disc and pp, fidanza flywheel with new surface. After break in I made about 5 passes at the track and the clutch started slipping in 3rd. Now the car slips on boost but it's barely noticeable and there is a clutch material smell after pulls on boost when you get out.

Also I've fought a low engagement problem right off the floor with the last two clutch jobs...definitely leaning towards fidanza using the wrong step, Ball is shimmed with a .77 thousanths washer. Other than that the car shifts perfectly at 7k no issues no reverse grind.
 
Are the clutch and pressure plate rated for your lvl of power, and has it been bled correctly? If you rev the engine a little while in gear clutch depressed does it move? I have a fidanza flywheel and no issues with it.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top