Could anyone please help? These parts won't last and I would really appreciate if anyone can confirm the parts compatibility between the Galant VR4 and the 1992 Talon.
I found a Galant 1990 VR4 in the junkyard with a very rear clean subframe but I am not sure if it fit my 1992 Eagle. This VR4 still has the transmission and the rear differential.
Does this subframe fits my 1992 Eagle? how about the differential and transmission?
I used a new OEM TOB and a new OEM fork and installed everything as it should be and changed the clutch fluid. I remember rechecking everything and I made sure the TOB bearing clip was seated properly before I mounted the transmission. There is no noise when I press the clutch and it feels as...
I installed and Excedy stage 1 clutch with a new OEM fork, TOB and machined the flywheel as per OEM specs. I never abused it and it worked fine until.
The car was sitting for about six month because of CAS problem that I fixed (See my post In Engine..Section). The clutch is an Excedy Stage 1...
I just had time to check it again and the problem was a bad CAS not my ECU. After changing the CAS, the car runs like a charm except for another problem which I will post a question on the drivetrain section
I already tried an auto ECU as I explained in my previous posts. It start fine and when it warms up, it runs really bad which really makes it not drivable. I know it will probably run fine if I swap 390 injectors instead of the original 450's, unfortunately I don't have them.
Would anyone let me know if the ECU for auto can be made to work on a manual?
I just need to be able to drive the car until I fix my ECU or find a good one.
My ECU is the problem. A friend had one but it's from a FWD auto. I tried to start and the car starts right away but it run really bad so I did not use it. Is there anything I can do to make it drivable until I can find a good ECU?
It's an Eprom so I am thinking about buying it as a spare and...
I will check it this weekend. I checked it about a year ago it looked fine but since it's socketed, it may be what is causing the problem. Is there a way to check if the socket is good besides a visual inspection?
The first time the engine just died while I was driving. It did not want to start right away so I towed the car home. However, it started later that afternoon and was running fine for about two weeks before it just died while driving to work. This time it does not want to start. I checked the...
I am looking for specific OEM parts for my EVO 9 and I was wandering if anyone can recommend a good vendor other than JNZ.
I use to buy my parts from JNZ but I am giving up on them as they basically ignored my last order and they never answered my numerous e-mails or phone calls.
I have been sending e-mails every week and still nothing. I received an e-mail requesting my approval for shipment cost and I approved that through e-mail and then nothing. I have never received an invoice through e-mail as I usually do and my credit card has not been charged. it has been a...