spring is broken so now your just blocking the port with the ball instead of regulating pressure. \

It would be pretty easy to confirm yourself just sand where the mounting points are. I would say it is a lose wire or connection but with out seeing the problem first hand this is only a qeuss.

if there is a fwd fly on a awd the flywheel should be pushing on the bell housing and not letting to motor turn so if that's the case you could just try and rotate the motor by hand if it does not spin that's probably the problem. No they are not interchangable the awd fly is smaller

you could have gotten a awd flywheel not a fwd.

1995 Mitsubishi Eclipse Eibach Pro-Kit Lowering Springs These are what i used.

I have a b&m short shiftier its about 2 inches shorter than stock works great.

The spring rate of the rear awd springs are higher for weight transfer. I have awd springs on my fwd and from all i can tell is the rear end feels like a brick.

If its a carbon clutch once they slip once there done but i clutch replacement should not vouch for a for sale sign

copper line has been a tried and true method for generations.

A good mechanical perform as good as electric signal wire . With that being said with new technology i would bet there almost on par with each other now days. I have noticed scene changing my oil gauge to a led its much more accruate when sudden changes happen but at idle it says i have low...

Thats a huge line for a oil gauge why so big that might be your problem right there.

what friction material does it have ?

Have you cleaned the throttle body by chance could it be carbon filled? also check egr valve.

I stand corrected it just would seem like the paint would show heat transfer and allow heat soak..Allison is not a transmission company that are install in cars they are a heavy duty application part i wounder why painting there parts voids warrnty then hmmmm.

Aluminum is very forgiving it will polish back up. To anyone that tells you paint wont effect efficacy .Keep this in mind Allison a maker of transmissions will void a warrnty if they find any trace of paint on the aluminum housing. With that said Im not saying a inner coolier wont work if...