The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

Recent content by BrandonGST

  1. ECMlink Tuning/Rolling anti-lag

    Yeah exactly you just hold the button. If you were to clutch in, press the throttle to start antilag and release the clutch like launching from a dead stop that’s more like clutch kicking for drifting. I think that would blow the tires off trying to do that from a roll 😂. In the car it basically...
  2. ECMlink Tuning/Rolling anti-lag

    So the purpose of the switch is to be rolling, say around 50mph, and be able to hold the button which makes the ecu think the clutch is in and activates antilag. But the clutch is still engaged. You hold the switch, mash the throttle at your target antilag start rpm , build boost, release switch...
  3. ECMlink Tuning/Rolling anti-lag

    Yeah I do still have some dialing in to do of my settings to clean it up, but yes on the switch its just a 2 wire switch, one tapped into each wire for the stock clutch switch. And while holding the switch with these settings im only seeing around 12-16psi, but the second I let off the switch...
  4. ECMlink Tuning/Rolling anti-lag

    Heres that log for ya! I forgot I got a new laptop and need to get all my pins reassigned and what not but around 23 seconds in you se the clutch switch go from 1 to 0 and thats when I hit the momentary switch and mash the throttle. Any questions just ask!
  5. ECMlink Tuning/Rolling anti-lag

    Yeah absolutely, next time I can get the car out (hopefully in the next day or two, when its not flurrying outside) I'll get a log and post it up!
  6. ECMlink Tuning/Rolling anti-lag

    Update on this, turns out it was working the whole time but I didn’t hit the button at the right time 😂. So I have antilag coming in at 4700rpm and 2 step set to 5500. I was mashing the gas and button at 4700. I tried this at 54-5500rpm last night and boom, spooled 17lbs, pops and bangs for...
  7. ECMlink Tuning/Rolling anti-lag

    I checked all the settings to make sure I'm punching the throttle and holding the button when I should. On switching maps that I'm not sure I didn't know you could switch maps with a switch like that on dsmlink, I will do some research on it though, thank you! I'll continue to work on this until...
  8. ECMlink Tuning/Rolling anti-lag

    That’s exactly who I meant lol, I actually talked to him a little on his settings for antilag. He has his on the wiper switch though. I do have my momentary switch up and going. I’m thinking it’s a setting I don’t have right. I know you have to have als between shifts checked before the ecu will...
  9. ECMlink Tuning/Rolling anti-lag

    I tried 10* on the way to work, it still just acts like a stall trying to roll into it, at an idle it also pops real big one time then just sounds like 2step does build 13-14psi though. I will add a little fuel and see how it likes that. But as far as the rolling anti lag goes, has anyone set...
  10. ECMlink Tuning/Rolling anti-lag

    That's something I considered as well, but since it worked great at idle using anti-lag, I figured if it was working properly it should work the same from a roll. So I was thinking I had something set up wrong since its not popping or anything from a roll. But, I will try that on the way to work...
  11. ECMlink Tuning/Rolling anti-lag

    Hey all, hoping for some insight here. So, recently got my car back up and running. Runs great drives great other than turbo lag which is why I've been messing with ALS. Little background for anyone reading this, I do have the clutch switch mod done, ECMlink v3 does see the clutch switch go...
  12. ECMlink Random lean condition, delayed throttle response, no luck

    I figured since it’s in the speed density kit on ecmtuning that it shouldn’t be a crap sensor, thanks man I’ll look into the aem
  13. ECMlink Random lean condition, delayed throttle response, no luck

    What map do you prefer to run? I definitely don’t want to continue to have this issue down the line
  14. ECMlink Random lean condition, delayed throttle response, no luck

    So Update, It was indeed the map sensor. New one put in and the car runs like a champ. I'm wondering if this had anything to do with a random knock issue that was progressively getting worse. No matter how much fuel was added up top, or how much timing was pulled there were a couple counts of...
  15. ECMlink Random lean condition, delayed throttle response, no luck

    It's about a year old, I actually considered that first because I previously had an issue with the harness pulling out of that connector. That has since been repaired, I double checked that its still solid wiring wise and the temp still rises as I mess with the car trying to start it
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top