Direct port done !

Working on bigger intercooler pipes new fuelpump Slowly moving but making progress

Yes it should slide on

No offense taken, At the end of the day it’s lack of fuel. The injectors were 9 years old I should have retired them. Did check the piston it’ll pass for another season.Totally understand the HG and hard parts situationThere is several things happening here since my last tear down. Big...

Getting parts in !

At this point I’m doing inspections and fixing the issues. After a very extensive investigation and review of the logs found that the injectors under flowing. One injector under flowing-700 cc nothing was flowing correctly the ecu was trying to over compensate with the other 2 cylinders giving...

Hello there I’m currently working on my nitro set up right now. The issue I came across is uneven distribution of the nitrous when you use a very large single dry shot. Like a 120 .. 2 cylinders will get more nitrous than others.If you going to do a big shot you need direct port wet and more...

I was able to clean up Some of the damage and dremel the piston smudge taking away the sharp edges

Looks like a plug broke 🫠 I’m sure the turbo is going to need to be sent off to FP

** update ** Went to IFO in Las Vegas and suffered a headgasket failure. It’s looking like it’s leaning out for a quick sec as i build to the boost in 1st. Nothing too extreme.Could be just a mechanical issue…The log looks good no signs of issues Just looked at the logAll data looks...

Last Saturday made the trip to Arizona to race at a no prep event. The rules for the class as I’m AWD 26” I had to Run with Big tire the goal was to not get beat first round.Round 1 6.0 @111 1.5 sixty Dsm vs c10 truck Dsm FTW truck overpowered the trackRound 2 5.9 @121 1.5 sixty Dsm vs...

Cam is GSC s3 Nitrous only 60 Ft Thank you

This past Sunday took the car out for TNT fine tune the launch.6.0 pass On this pass the nitrous was making the car drop fuel pressure as the boost ramp in nitrous turns off at 45 mph so i turn it off at 30 to keep everything “happy” also only left with 9 psi on the 2 step5.9 pass Better...