We are clearing out a few DSM parts we have here at the shop. They are listed below. Let us know if you are interested in any. All prices are w/o shipping costs unless noted.
Brand New SBR Bastard 20G. Ported in and out ($120 value). Flapper welded for use of external wastegate on the manifold TD05H housing
This turbo uses a 20g comp wheel stuffed inside a 16g compressor cover. It is a direct bolt on for all 5 speed 1g cars and is an easy install on any 2g with our install kit. No one has to know your little secret with the SBR Bastard 20g.- $800
Barely used Fuel Injector Clinic 650cc fuel injectors- $200 (used for startup then changed set up and went with 1000cc injectors instead. Great condition
ACT Streetlite Flywheel 600155 for 1G DSM FWD- 6 BOLT ONLY- This flywheel was never run but it was bolted to the crank for a clearance inspection. Basically brand new. Just has surface marks where the bolts were tightened. $200 OBO
Brand New Fuel Injector Clinic DSM-2G 6AN Fuel Pressure Regulator Installation Kit
Fuel Regulator Kit: DSM 2G -6AN Fuel Rail Adaptor with Aeromotive 13105 Fuel Pressure Regulator, Liquid Filled Carbon Fiber Face Fuel Gauge and complete installation kit. - This kit includes all fittings from the fuel rail outlet to the regulator outlet. Comes with black hose.
$245
Brand New Apexi Turbo Timers (silver) $85 shipped in the US.
2G DSM factory cam gears (pair) $10
2G DSM J-pipe for 16G turbo- $40 (will clean up and powder coat any single color of your choice for an extra $15)
2G throttle body elbow- $50 (includes having it powder coated any single color you want)
2G Talon black wing- $20 (prefer to pick up because its large to ship)
Brand pair of New McQuay-Norris inner tie rod ends that were for going in a 97 Eclipse GSX- $60 for both
Brand new AEM UEGO black gauge face with silver ring (gauge face and ring only...not the gauge)- $5
-6AN factory fuel rail feed fitting- $10 (1 only)
Brand New Autometer Phantom 52mm 150 PSI Mechanical Oil Pressure Gauge- $40
2G DSM lower steering column cover (black plastic)- $10
2G DSM upper steering column cover (black plastic)- $10
2G DSM black plastic gauges surround piece- $15
2G DSM black leather shift boot- $10
2G DSM horn- $10
2G DSM gray seat mounting bolt cover clips- $8
Brand new Dejon Tool Compressor outlet elbow (powder coated gloss black)
Increase restricted area 37% over stock. Fits 14b (stock 1g) & 16g Compressors.
INCLUDES:
1. 1.75"OD mandrel bent elbow
2. Gasket and Porting template
3. (2) Stainless steel socket head cap screws.
DOES NOT COME WITH AIR NIPPLE
$35
Factory 2G DSM AWD Front sway bar- $40
Brand New Suspension Techniques 2G DSM AWD rear sway bar (will not clear 3" exhaust)- $100
Brand new 2G DSM clear bumper lenses (about 20 pairs)- $15 each pair.
Brand New AEM UEGO gauges- $259.66 shipped for free in the US.
Cometic Complete Engine gasket set for 1G DSM- $190 shipped free in the US.
For a description please see-
Cometic Complete Engine Gasket Kit- DSM: BoneHead Performance
Brand New OEM Mitsubishi EVO III exhaust manifold- $204
Brand New 1G DSM FWD Three Speed Scatter Shield- $150 shipped free in the US.
Brand New Megan Racing polished rear lower strut bar for 2G DSM AWD- $20
Brand New Vibrant Performance Stainless Steel V-Band Flange Assembly for 3" O.D. Tubing
- V-Band Flange Assemblies are a popular and effective alternative to traditional flanged or slip fit tube connections. They work very well in operating conditions involving stress, vibration and extreme temperature fluctuations.
- The V-band clamp design allows for a gasket free seal and the quick release feature of these clamps makes swapping parts at the track quick and easy.
- Vibrant Performance V-band flange assemblies feature a unique "Male/Female" design to ensure proper alignment of the flanges inside the clamp.
- each assembly consists of two (2) V-band flanges and one (1) Quick Release V-band clamp.
$60
Vibrant Quick Release Stainless Steel T-Bolt Clamps (comes in pack of 2)
2791- $10- Clamp Range: 2.06"-2.37"
2792- $10- Clamp Range: 2.37"-2.68"
2793- $10- Clamp Range: 2.66"-2.97"
2794- $10- Clamp Range: 2.90"-3.21"
Brand New OEM Mitsubishi wheel stud- MB911495- $3
Brand new OEM Mitsubishi Timing Belt Tensioner- MD308587- $80
Fits 05/01/95 to 08/02/95
We have about 20 cracked 4g63 valve covers laying around. We use most of them for samples for powder coating but still have many here. $15 per cover Good to paint or powder coat and hang on your shop wall or bedroom wall or could possibly repair it for a quick fix.
Please email, PM or call us if you are interested in anything. If you need to see a picture please let us know.
Thanks
Bonehead Performance Inc
1836 Stout Dr
Unit # 18
Warminster, PA 18974
215-674-8206
