2g CF Exhaust heat guard

[greentrbo_95gst]

The first test fit version is out. We have to make sure everything fits right and finalize the product.

Teaser shot:

[greentrbo_95gst]

The cover goes on the rear bumper around your tail pipe. For some it's a cosmetic upgrade and others use it to prevent their bumper from burning. We are expecting a price of $140ish shipped. We will start taking pre orders later on this week. This will be a made on order part. Evo guys use rivets or body shop glue to install this.

[BoostedinSoFla]

Originally Posted by greentrbo_95gst

I got a couple of questions/suggestions here. Are you guys gonna make it more round instead of how it looks in the pic right now? Kinda looks "too big". If you guys can somehow round it up a bit sorta like the Evo ones below that'll be good. I also am wondering about the price. $140 shipped is kinda steep don't you think. I see Evo X ones being sold for $60 shipped per side.

[greentrbo_95gst]

Originally Posted by 4seaer

WHAT ABOUT THE 1G, DONT FORGET MORE PEOPLE HAVE THEM THEN 2G'S!!! It's amazing how nobody wants to make anything for the 1g?!! When I get the right amount of money... all you shop's (who think there's not enough purse out there for the 1g's) can watch me get rich!!!!! A shame...

We have 1ga, 1gb hoods, doors and hatches

[greentrbo_95gst]

Originally Posted by ZLODEY

I think it should be round. How much of us are still have stock muffler with double exit?

It will most likely be rounded after the test fitment.

[greentrbo_95gst]

This piece is not cut yet. It will look very similar to the Evo ones.

[greentrbo_95gst]

Ok, let's start a group buy on this and depending on how many people we get I will fight the price with our guy who makes them.

Once you put your name in we need a deposit through paypal. Unfortunately, the group buy with the spyder trunks went bad for us and we couldnt get a hold of 6 people which we had to take losses on. I hope you understand.

1.
2.
3.

[greentrbo_95gst]

Originally Posted by 97droptopturbo

Sup Kamil, i'ld love to rock one of these on my car but i got the buddy club 2 rear bumper, have any clue if it'll fit?

I have no idea. Once the test model gets shipped over here come on by and we'll try it out.

[greentrbo_95gst]

Originally Posted by CPHunter

get us a good estimate on these like Example 15 people $120, 25 people $100. that way i know if i wanna join the Group buy or not

We are shooting for 15 people 125 shipped. I just gave them more business with galant hoods, trunks and fenders flares and also Evo X parts so they have to be nice to me.

[blcknspo0ln]

Originally Posted by greentrbo_95gst

Once you put your name in we need a deposit through paypal. Unfortunately, the group buy with the spyder trunks went bad for us and we couldnt get a hold of 6 people which we had to take losses on. I hope you understand.

Deposits on group buys should be mandatory, I wouldn't feel bad about asking. I don't know if I missed it, but does this fit the 2gb talon bumper? Eyeballing says it just might .

[greentrbo_95gst]

Originally Posted by mitsuclipsegsx

How is it going to fit on the bumper?

The same way Evo guys install them.

[FFTec - jerry]

Originally Posted by vaboys2ndgen

3M tape and/or revited?

You can mount them however you choose, both of those options will work for you. For the most part, I see people drill small pilot holes on the bottom of these types of covers and use rivets, and then the tape on the top half to make it look cleaner. Kamil, shouldn't you add yourself to the list????

Jerry

[ernie]

1. Rayek
2. Zmann42087
3.Gamble97
4. Vaboystakinova
5. turbo1307
6. tofuboi
7. H8R>Pending picture of item installed and proven.
8. Talonalex92 - providing it fits the 2gb talon.
9. MXBOOST- Pending picture of item installed/fitment and proven.
10. Chuck_3
11. SOADweskey - Also pending picture of it installed.
12. csgsx23 - pending picture as well.
13. Illiclipse- also pending picture of item/ installed
14. 97gstjosh-pending picture of item installed
15. ernie

[greentrbo_95gst]

I think the shield is coming in tomorrow. We'll make sure everything fits, take pics and post it here.

[greentrbo_95gst]

It came in, but it's so hot over here. I don't know if I wanna go outside and test fit it.

[greentrbo_95gst]

Fine....here are the pictures> Keep in mind that this is a test version so we still have to cut it to be more rounded and smaller. Also, I just held it by my finger so it's not glued or anything.

[greentrbo_95gst]

We are officially starting to take pre orders. Paypal is sales@hirevperformance.net
Please make sure to include your full shipping info and what part you are ordering. We don't have a talon available at the shop now so I cannot tell you if it fits on them yet.
The deposit amount is $50- non refundable. Once you are on that list, consider yourself a new owner of a 2g exhaust heat guard.

I will post pictures once it's all cut up. I like the fitment on it. I tested it on 4 different bumpers and it fits great. If your car has been involved in a rear end collision or you have a twisted bumper from doing stuff like this ()
don't expect this piece to fit right.

[greentrbo_95gst]

Originally Posted by xxShaneOmac

Im a perfectionist and Im sure some more guys on this thread are too.

Get it all done up and ready like your selling it.

Glue it on :[
Or Rivet it! and show us the final product, what we are spending our money on and Ill jump in,

I need some pictures from normal distances and close up's

I know your not finished and that was a quick test so thats fine, Im just waiting to see what Im buying in full.

No problem....

[greentrbo_95gst]