Products the DSM crowd would like to see made

[Gamble97]

Originally Posted by DGajre777

1) 2G Carbon fiber fog light bezels (entire blanks like the one below)

Where did you find that ? And who sells them?

[InvaderGSX]

I like the billet style motor mount idea, but it cannot have polyurethane inserts because I put the inserts into my stock mounts on my car 2 years ago and couldn't stand them. It vibrates insanely. After about a month I had to sell them and just buy new mounts.

Another thing I would like to see even though I do not need it is an option for the 96-99 ECU's. Someone needs to hack that bastard so that 95 eeprom ecu's are not required. They are becoming too hard to find. Without an EEPROM there is nothing that can be done unless you want to drop $1500 for an AEM EMS. Back in the day when I first got into the game in 2000 there was an XS engineering ECU that had some board wired into a 97, but all that could do was make it into a TMO style chip. Something similar to that in a DSMlink style datalogging deal would be cool.

[FallnAngel]

Originally Posted by goodbye

I'd definitely like to see some front knuckles that mount up the EVO Brembos. The rears could be built into a custom hub assembly that goes with an entire rear tubular subframe ala Marco's 2G stuff.

+1, for a 2g please!

[FallnAngel]

A 2g hood without the budge.

[hdoerr]

Carbon Fiber center console lids for 1Gs.

[Car_guy_09]

420a Down pipes (for us turbo guys duh)
Performance tranny parts for the A604
Heat shields for the 420a hahn mani and turbo
And many more 420a parts

[Gamble97]

Originally Posted by FallnAngel

A 2g hood without the budge.

So you want your hood to not close?

[steves97gst]

im down for the 3.5" exhaust but for a 2g gst that would b very nice

[Bcoy]

+1 Bolt on 5mph bumper support for those running large fmics.

[asexton6969]

Originally Posted by twoTSis

Which is always out of stock... Why even have them on your website if you can't actually sell them? Oh well!

I'd like to see a DSM performance parts store here in Iowa.

I'm sick of relying on the internet for my parts. If any vendor was interested in starting a store around here that'd be great, I'd be able to prove to you that there is a large amount of willing customers available here in the Des Moines, IA area.

Local Iowa DSM Parts vendor: ImportEvolution.com - Import Performance Parts, DSM, WRX, Supra, Honda

Local Iowa Fabrication shop (owners have nothing but dsm's) Tab-Fabrication

[kmoore]

Originally Posted by dsmfevr1

a carbon fiber valve cover

I hope you're kidding. But I guess not.

Originally Posted by FallnAngel

A 2g hood without the budge.

Impossible.


What I'd like to see made (if possible) would be a small plastic duct piece that bolts to the top of the passenger side "hole" in the bumper (not the foglight hole but to the left of it) that we coud run ducting up to the filter...

I hope that made sense.

[n55long]

+1 Dual-Projector Headlights

-Frog Eyelids for Headlights
-16g with Adjustable wastegate actuator
-Sliding Seat brackets (for racing seats)
-More 2ga parts

[Boostjunki84]

Originally Posted by D_Eclipse9916

Carbon Fiber sunroof replacement that has one or two latches so it can be easily taken out.

+1... Nice idea. I would definitly have to get one of these.

[Morpherex]

Originally Posted by InvaderGSX

I like the billet style motor mount idea, but it cannot have polyurethane inserts because I put the inserts into my stock mounts on my car 2 years ago and couldn't stand them. It vibrates insanely. After about a month I had to sell them and just buy new mounts.

Another thing I would like to see even though I do not need it is an option for the 96-99 ECU's. Someone needs to hack that bastard so that 95 eeprom ecu's are not required. They are becoming too hard to find. Without an EEPROM there is nothing that can be done unless you want to drop $1500 for an AEM EMS. Back in the day when I first got into the game in 2000 there was an XS engineering ECU that had some board wired into a 97, but all that could do was make it into a TMO style chip. Something similar to that in a DSMlink style datalogging deal would be cool.

They're supposed to vibrate the car. Man up and take the vibration lol.

[forcefed4]

Originally Posted by InvaderGSX

Another thing I would like to see even though I do not need it is an option for the 96-99 ECU's. Someone needs to hack that bastard so that 95 eeprom ecu's are not required. They are becoming too hard to find. Without an EEPROM there is nothing that can be done unless you want to drop $1500 for an AEM EMS. Back in the day when I first got into the game in 2000 there was an XS engineering ECU that had some board wired into a 97, but all that could do was make it into a TMO style chip. Something similar to that in a DSMlink style datalogging deal would be cool.

ECU+ Tuning and Data Logging Package

[snailspool]

1g true projector style HID kits

[silverbullett]

Originally Posted by forcefed4

ECU+ Tuning and Data Logging Package

I just read on his website that he's no longer selling or producing these anymore. I was looking into one and found this out. Mach V may still have some lying around but, I didn't look into it.

[Boostjunki84]

Originally Posted by silverbullett

I just read on his website that he's no longer selling or producing these anymore. I was looking into one and found this out. Mach V may still have some lying around but, I didn't look into it.

The Mach V site already has them listed as discontinued.

[talon96tsi]

HID Headlight kit for 1ga.
Removable carbon fibre sunroof

+1 For tubular control arms and crossmembers for 1g,
+1 for carbon fiber aero parts for 1ga
+1 for harness bar

[Carmenpzito]

Whats with all the body kit hid stuff...the OP said performance based ideas...carbon fiber is nice and light but what would HID or projector lights do unless you race around at night or something...