Products that the DSM crowd would like to see made

[delta448]

Does anyone sell tubular K members, and upper/lower control arms?
-I see you guys asking for 1G versions, are they already mass-produced for us 2g guys? I've only ever seen one-offs.

I love the idea about the kunckles with the capability to bolt on stock evo brembos, but maybe there's cheaper and more plentiful sources for as-good performing calipers and rotors... like maybe from the domestic V8 realm?

I'd like some tools, not necessarily parts. I'd like to see a valve spring tool made to fit the 4G63 head, even if it's a modified version originally for another engine. Or how about an aftermarket version of the notorious crank sprocket tool that we can't get?

[Cesar]

A dsm inpired kit car that utilizes dsm powertrain and body panes, glass and whatever else.

[hks-gst]

Originally Posted by RU2SLOW?

Traction bars for FWD 1Gs. Not sure if they make them for a 2G but it would be nice to have some additional bracing to help with drag racing. I know these are pretty easily available for Hondas/Acuras.

x1 I would love to see traction bars of some sort being made for FWD 1g and 2g's.

[gorf]

plasma injection manifold that will hold till warp five.

[awdtalontsi1992]

- 1G Tubular Front K-Member
- 1G Tubular Front Motor Mount Crossmember
- 1G Rear Tubular Crossmember
- 1G Tubular Rear Trailing Arms
- 1G Tubular Upper and Lower Control Arms
- 1G Tubular Front Control Arms
- 1G Carbon Fiber Front Fenders
- 1G 3.5" Turbo Back Exhaust
- 1G Aftermarket Gauge Replacements......I have seen a couple made but I would like to see a few premade pieces for the stick cluster
- 1G Electric Power Steering Pump Setup....like the pump from a MR2

[SanTa_]

Originally Posted by DSM_PWR

*Carbon Fiber Winshield Wiper Cowl

+1 .. haha

Also a carbon fiber exhaust shield just like those on the Evo's.

[ilikespeeding]

Bolt on trunk battery box for full and honda sized batteries
Cheap lightweight rims that look similar to the 98+ Eclipse GST/GSX rims


+1 on radiator cooling plates
+1 on ram-air headlights

[b00stedtalon2]

Sweet billet motor mounts like these.



And I like the Idea for the Ram air headlight. I would have bought one instead of making my own. (See avatar or my gallery)

[prostreetdsmx1]

Originally Posted by hks-gst

x1 I would love to see traction bars of some sort being made for FWD 1g and 2g's.

based off of the pic in your avatar i'd bet you would want something like that.

[prostreetdsmx1]

Originally Posted by b00stedtalon2

Sweet billet motor mounts like these.

They are in the works my friend

[goodbye]

The 3.5" exhaust was available from Buschur a few years back. He didn't make many, but they were reasonably priced. Something about fitment so he quit making them or something. I bought one used, it's loud as hell, but fits just fine.

+1 on all the tubular suspension pieces, I'll probably just make my own. I'd definitely like to see some front knuckles that mount up the EVO Brembos. The rears could be built into a custom hub assembly that goes with an entire rear tubular subframe ala Marco's 2G stuff.

[b00stedtalon2]

Originally Posted by prostreetdsmx1

They are in the works my friend

Awesome! I will be all over those.

[silverbullett]

3" turbo-back for FWD 2g's. I heard Buschur was making these for a while but, maybe I'm mistaken.
x3 on the FWD traction bars.

[Scientist]

I would like more stuff like what's available for DSMs for the Galant VR4s. thats all.

[mnim15]

Aftermarket 2G Talon Tail lights.
Possibly with LED's
HID Reverse lights
Dual-Projector Headlights

Stainless Hardware Replacement kit
(assortment of mis. sized nuts and bolts found on DSMs)

[TurboTsiThatFly]

Originally Posted by DSM_PWR

*Carbon Fiber Winshield Wiper Cowl

i would like to have one of these also =D

[Advan_Evo]

- a butterfly brace like miatas get for the 1Ga, 1Gb and 2G, if im not mistaken and they're already around. These would be amazing for TA and AutoX. Here's the link for a pic: Flyin' Miata : Chassis : Stiffening : FM butterfly brace

- something like a 2-way or Fully Customizable LSD for the 1Ga and 1Gb

- carbon fibre front and rear diffusers

- c-pillar bar for the 1Ga and 1Gb, if there isn't one already

- maybe a clean widebody kit, or at least some blister fenders to widen the arcs for the 1Ga and 1Gb

[jdbl14]

Originally Posted by ilikespeeding

Bolt on trunk battery box for full and honda sized batteries
Cheap lightweight rims that look similar to the 98+ Eclipse GST/GSX rims


+1 on radiator cooling plates
+1 on ram-air headlights

+1 on the rims, like 18X8.5 or9" for less than a grand...

affordable bolt in seat adapters.
a front bumper thats almost like stock, but all openings are bigger.
intake pipes that aren't ridiculously overpriced.(i may start selling my own).

[DSMunknown]

Originally Posted by silverbullett

3" turbo-back for FWD 2g's.

MITSUBISHI TB

[Anger890]

2g fuel tank that allows you to mount 2 044 Bosch pumps internally or a baffled/sumped tank that would allow you to mount external dual pumps without all the current hasseles.

[Splitpi]

A helical LSD that is cheaper than qauife....