Products that the DSM crowd would like to see made

[1gtalonracer]

1ga fenders made of cf

[tristanmb81]

i would like to see real hid projector headlights.

[Ryan86]

I know it's already been said 20+ times, but...


A RADIATOR COOLING PLATE would be great. Or some type of ducting to guide more air to the radiator. I can't run my A/C when it's 80+* out because of my FMIC, let alone drive on the freeway.

Going up a hill on the highway I'm stuck doing 40mph because the temp gauge is way too finicky.

I would definitely shell out $100 for a simple bolt on part to fix this.

[1gtalonracer]

1ga ram-air headlight

[Tuning Spirit]

I also think we definitely need widebody/flared fenders and quarter panels for the 1G and 2G; well most all DSMs. I think I saw someone mention it before on here. If not mentioned before though, we need simplified lip extension kits for the 1Gs. All of these body kits available look goofy and might I say - riced out......

[dsmcolt969]

umm parts fpr 89-92 mirages perferably a full coilover and a lighter hatch...just some ideas

[ImportWarrior]

REAR CV shafts and hub assemblies. this is the most important thing that could save our
cars for the future. no one makes them anymore. 2G REAR CV shafts !

2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts !
2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts !
2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts !
2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts !
2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts ! 2G REAR CV shafts !

[TheBigPhantom]

Pre-made valve covers with the dual vent ports.

Bolt on 2g 3" to 4" cold air intake from fender well to turbo.

Engine Torque (Torsion) Damper Kit. (they make them for evo's why not us??)

Bolt on sheet metal replacement covers for interior doors, floor, rear, spare tire area, etc. (weight Saving mod) Would make weight saving look like a clean new way of modding cars. Could potentially be a business to have bolt on parts like this.

A front bumper that looks similar to the stock one but with a bigger front dam like the new Evos.

Engine covers for the bay and the motor. Like the new Crossfire and 350z have and other cars. Just gives a more modern touch to the interior outdated plain engine bay.

Interior MAFT GEN II holder in vent like the SAFC holder but for a MAFT GEN II setup.

Replacement side mini-mirrors..dont have to be carbon fiber and cost 300 dollars. Just some nice small mirrors like the carbon fiber ones APC sells.

Bolt on kit to light up the center Tail Light.

Interior Rear conversion kit for 2g so it eliminates the back seats and just makes the car a two seater with a nice smooth floor space in the back with or without compartments. That would be hella nice.

AND remake or bring back the greddy type-S so that we can have that classic sound AGAIN!!!

BTW did you guys hear about that new in-line bov??? its on youtube check it out. I wonder how it would sound if fit on a car!!

+1 for the 4" Exhaust

[Sp1kE]

A device that can screw onto the speed sensor on the tranny, to eliminate that reel line. To convert to a digital speed read out.

[Project2G]

Originally Posted by sniperelite

carbon fiber center console!

There's been one on ebay the last couple weeks. The seller is also selling cf kick panels.


eBay Motors: 95 99 Mitsubitshi Eclipse 2G Real CARBON FIBER Console (item 170258837873 end time Sep-11-08 12:10:59 PDT)

And kick panels for anyone looking.

eBay Motors: 95 99 Eclipse 2G Real CARBON FIBER Console under panels (item 170258837635 end time Sep-11-08 12:10:36 PDT)

[Project2G]

Originally Posted by DSM LoVeR 96

I like this idea too

I would buy one.

(2G passenger side headlight ram air)

[TheBigPhantom]

Originally Posted by Project2G

I would buy one.

(2G passenger side headlight ram air)

I've made on before it's not hard at all if you have access to a spare headlight.

Some cutting, some fiberglass, metal screen, a little piping and top it off with a a little paint.

[ImportWarrior]

I feel any part that is not made by Mitsubishi anymore needs to be a great concern
for us all. With out those parts our cars are going no where fast.

[GDNF2ET]

A 1g torque converter that's better than our re-stalled options that we have now..

[Project2G]

Originally Posted by TheBigPhantom

I've made on before it's not hard at all if you have access to a spare headlight.

Some cutting, some fiberglass, metal screen, a little piping and top it off with a a little paint.

Care to do a write up?

[slipstream808]

Originally Posted by ImportWarrior

I feel any part that is not made by Mitsubishi anymore needs to be a great concern
for us all. With out those parts our cars are going no where fast.

I've been saying this for YEARS now. You wont care about a ram air intake or heat shielding or anything when you don't have a qurter panel or need a new floor pan or yes, THE REAR CV SHAFTS AND HUB ASSEMLIES!!

[FLASH1970]

As stated before... Tubular control arms, K-Member, rear diffuser for 2gB Talon that would flow well with how the bumper bumps out at the bottom.

[onyxx2000]

I would really like to see a nice rear bumper cover that would still allow you to use the Talon tail lights (both 1gb and 2g). They look so much better in my opinion than any of the eclipse tail lights.... Euro style or JDM.

[xreaction122]

a 2g race bumper would be nice. dejon makes them for a 1g but no 2g love

[asd_gst]

o2 housing for tial 44 that resircs the wastegate back in, ive seen alot of them for the 38 but only can find tial 44 with atm dump

[Cesar]

MB909359 is discontinued...