GROUP BUY - SS Heatshield for FP Cast Manifold - Page 5

mitsumissile · 03-03-2008, 11:14 PM

payment sent. I want a pre-cut fo EGT sensor also. Thanks

marcmsj · 03-04-2008, 06:26 AM

Quote:

Originally Posted by JMFabrications

Sure no problem, is there anyway you can take a picture of your manifold with a mark as to where exactly you are placing the probe?

Would you guys be charging for this service? If so, how much?

TSiAWD666 · 03-04-2008, 07:42 AM

I pm'd JMFabrications with a picture of where my EGT probe, which as I described earlier is in the "dot" just in front of the top nut near runner 1. This is where FP tapped it for me so this is where it went heh. Haven't heard a response yet on whether they will do the cut just yet, and at what cost if any.

If i'm to be the reference case here's the picture:
Turbo Sees Daylight

xxShaneOmac · 03-04-2008, 07:59 AM

This is the same place FP tap'd my manifold.
I allready have my heat shield bought pre GB

I think that I will just have to cut it, eww I dont wanna mess it up.

99dsmGST · 03-04-2008, 09:06 AM

I need the added price on the cut out for the egt, so I can send the final payment.

mach4g63t · 03-04-2008, 11:59 AM

I jumped on the band wagon. Pretty excited to get this sucker.

Not only should it be functional, but it's total engine bling.

jazzyjay · 03-04-2008, 02:49 PM

deposit sent

99dsmGST · 03-04-2008, 03:02 PM

I need the final price for the added egt pre cut.

spooln4fun · 03-04-2008, 03:21 PM

Final payment sent! can't wait for this to come in the mail!!!!!!!!

JMFabrications · 03-04-2008, 06:26 PM

Those of you who need the heatshield notched for an EGT probe please add $10 for this service and make a note of it when sending payment. Hopefully you all have the EGT probe in a similar position as TSiAWD666.

We still havnt purchased the etching machine and im not sure if we will have it by the end of the GB but I will let you all know. Some of you have requested no logo which is fine if we decide to go through with the etching machine.

Street Surgeon · 03-04-2008, 10:17 PM

I too would prefer one with NO logo, thanks! I'll be sure to annotate that in the finaly payment notes.

-Cory

99dsmGST · 03-05-2008, 09:05 PM

The logo will be great for me. I would rock it with out a doubt.

Street Surgeon · 03-08-2008, 03:49 AM

JM Fabrications:

I'm combining shipping with "turbo addict" on these forums, he'll be sending both of our remaining balances to you and you can just ship them both to him so we can save on shipping. Again I want one with NO LOGO and polished please! Thanks guys!!!

Black_Bullet · 03-09-2008, 12:49 PM

I will be sending my payment in full within the next few days.

Jay

TSiAWD666 · 03-11-2008, 01:32 PM

So when will final payment be required? March 14th?

spooln4fun · 03-11-2008, 02:53 PM

Final payment may be made at any point and time now due to the price is as low as it will go. I know for a fact I have sent mine in, as well as a few other have paid in full. Depending on your options you like the price will vary, contact them for the final price.

* i am in no way official speaking for them, nor represent them* although i would if ask

JMFabrications · 03-12-2008, 06:19 PM

Quote:

Originally Posted by TSiAWD666

So when will final payment be required? March 14th?

Correct, you dont have to pay until the 14th, and even if you cant make final payment by then I dont mind waiting a few more days, the heatshield will not ship until payment is received. We are up to 32 people now, I will post a final list Friday after 6 as well as other details.

99dsmGST · 03-13-2008, 11:04 AM

Thanks for keeping us updated.

Question. Those of us that have already paid in full, will we get our heat shield soon after the the end of today? I am in no hurry at all, I was just wondering.

JMFabrications · 03-13-2008, 11:12 AM

Quote:

Originally Posted by 99dsmGST

Thanks for keeping us updated.

Question. Those of us that have already paid in full, will we get our heat shield soon after the the end of today? I am in no hurry at all, I was just wondering.

We wont actually start on any of them until the GB is over, we will also try to ship them in the order that deposits were placed. Some of you may receive your heatshield as early as next week but it could take up to 2 weeks until all 30+ have been shipped. We make these to order pretty much but have most of the parts ready to go on the shelf.

Quick update on the logo etching, unfortunately we couldnt get the etching machine in time so none of the heatshields will have a logo on them...sorry! I will make sure to include stickers with everyones order though!

99dsmGST · 03-13-2008, 11:23 AM

Quote:

Originally Posted by JMFabrications

We wont actually start on any of them until the GB is over, we will also try to ship them in the order that deposits were placed. Some of you may receive your heatshield as early as next week but it could take up to 2 weeks until all 30+ have been shipped. We make these to order pretty much but have most of the parts ready to go on the shelf.

Quick update on the logo etching, unfortunately we couldnt get the etching machine in time so none of the heatshields will have a logo on them...sorry! I will make sure to include stickers with everyones order though!

Ok, thanks. Now I can rock the license frame and sticker.

ali_viento · 03-13-2008, 03:25 PM

Hey Jim
I already bought the JMF heat sheild but now me and some of my friends need the heat sheild for our FP30 turbine housing .
Can you make this heat sheild for us ? i can promise you that if you will make it , you have many customers on it .
please let me know ASAP.
thanks

daren_p · 03-13-2008, 05:52 PM