safc help

[heater]

i have read alot of fourms that people install the safc and then cant start the car i dont want this to happin to me i have a logger but want to know what to set the safc at right now. i have mbc and b16g i have a 255 and 550's but waiting on my fpr to get here so havent installed them but want to put in safc to get a jump on it. also right now im only running 9 lbs of boost to be safe with stock fuel. i have a 98gsx

 

[CanadianTSi]

Just leave it at 0 if you haven't done any fuel mods yet.

 

[DSMTalonAWD51]

hey said he has 550s. set lows and hi's to -10ish so the car wont drive like ass, but dont do any WOT driving until you figure out the logger. to go tech sectin read up

 

[CanadianTSi]

hey said he has 550s.

You might want to re-read his post

 

[spyderturbo007]

Here is a great SAFC-II walkthrough:

http://www.racingknowledge.org/topic.asp?TOPIC_ID=1011

You really need to get that AFPR installed before you do any "hardcore" tuning. I would stay out of WOT until you get the AFPR installed. Just try to set the FT's the best you can and transfer those settings to the Hi-throttle table. Then stay out of the throttle.

Enjoy!

 

[CanadianTSi]

I think the ECU can handle the stock injectors quite fine so I don't see why he needs to set his FT's or stay out of WOT