2G Setting base timing

[4g63swap]

ok I have a 95 Talon and I know that to set the base timing that I have to ground the brown plug, but here's the problem I believe that the guy that had this car before me cut the plug out for some strange reason so here's what I need, someone to tell me what colors are the wire(s) that go to the brown plug. Thats it.




thanks
4g63swap

 

[HighPSI TSi Guy]

if you are still running your stock CAS have fun trying to SET the base timing..

 

[Sk8er07999]

Ha ha ha thats the funnies thing I have heard all day!!!!! :laugh: (You can't adjust base timing on 2g's unless your running a 1g cas.)

 

[4g63swap]

I have done a swap so I have a 1g cas. so what are the colors of the wires that I have to ground to set the timing

 

[HighPSI TSi Guy]

well in a 1G it's a plug on the firewall.. i honestly don't know off the top of my head what to ground on a 2G. you can check it without grounding the wire though if you have stock cams/cam gears... it'll jsut read different (i.e base may read a little high)

 

[pimpngear]

Poke around in the wire loom behind the batterey, mounted on the firewall, above the porportioning valve. It should be the ONLY wire by itself. Black if I am not mistaken.
-Rob

 

[Diceman19]

my wire is white with a brown stipe. good luck.

 

[DevilSperm]

you will find your answers here young grasshopper http://www.dsmtuners.com/forums/showthread.php?t=134301&highlight=timming

incase you are lazy, black wire with a green stripe