1st pull 3rd gear
http://jat.zftp.com/backfire.avi
TIMA O2-R TPS RPM KNCK INJP
27° 0.76V 98.0% 3719 0 13.31ms
20° 0.84V 99.2% 3844 0 18.43ms
17° 0.84V 100.0% 4188 5 19.46ms
16° 0.84V 100.0% 4344 5 19.97ms
16° 0.84V 100.0% 4469 4 21.50ms
16° 0.80V 100.0% 4594 4 21.25ms
14° 0.84V 100.0% 4375 3 20.22ms
19° 0.64V 100.0% 5125 3 22.53ms
18° 0.84V 100.0% 5094 2 18.94ms
19° 0.35V 100.0%
7969 2 20.99ms
22° 0.84V 100.0% 5375 2 21.25ms
21° 0.84V 100.0% 5594 1 18.69ms
22° 0.80V 100.0% 5156 1 19.97ms
18° 0.82V 100.0% 6031 0 19.97ms
2nd pull 3rd gear
http://jat.zftp.com/backfire2.avi
27° 0.12V 96.9% 3313 0 9.98ms
24° 0.78V 98.4% 3469 0 14.85ms
16° 0.84V 99.2% 3656 0 18.69ms
16° 0.84V 100.0% 3906 0 18.43ms
18° 0.82V 100.0% 4063 0 18.43ms
18° 0.82V 100.0% 4281 0 18.94ms
18° 0.84V 100.0% 4469 0 20.48ms
18° 0.84V 100.0% 4594 0 21.76ms
18° 0.84V 100.0% 4656 0 20.99ms
19° 0.84V 100.0% 4969 0 20.48ms
19° 0.78V 100.0% 5375 0 20.74ms
20° 0.21V 100.0% 5156 0 18.94ms
21° 0.78V 100.0%
7969 0 19.71ms
22° 0.68V 100.0% 5313 0 0.00ms
10psi on each run, 7k rpms are bold because i never hit that rpm, just out of no where my log shows this. this happened after installing an safc that didnt work, so i unhooked it and wired it correctly (MAF or MAS sensor wiring that was went through safc is back together and battery has been reset) mods are listed in profile.