clutch problem?

[b00St3DgST]

ok,my clutch slips a bit after i have been driving for a little while,i have a new slave and master cylinder.when i pump the pedal at stoplights it will do fine and then at the next light ill do the same thing...also when i bleed the clutch it grabs perfectly and doesnt slip at all...i was wondering..would i maybe need new lines,air might be finding its way in somehow?or go ahead and get a whole new clutch assembly?thanks alot.Shawn

 

[Logue]

http://www.roadraceengineering.com/clutchandflywheeltech.htm

Check out this site has good info on it.

does your clutch get hard at the top or anything, or the engagement point move around.

if its not that than whens the last time your clutch was replaced??

JJ

 

[b00St3DgST]

yea the release position seems like it moves around and it will get a little harder to push when it starts to slip,clutch was replaced appx. 15000 miles ago.thanks for the help.Shawn

 

[Logue]

u probly have the 2g clutch pedal pump up problem.

you have to give the clutch pedal more free play at the top. by adjusting the upper pedal adjustment on the clutch the rre site i gave you tells you how to fix it.. check it out like 3/4 of the way down the page.

JJ

 

[b00St3DgST]

i just did that and its fixed!..such a relief,thanks alot for the time,preciate it.Shawn