mattp_65
Supporting Member
- 515
- 167
- Aug 16, 2004
-
Granite Falls,
Washington
Can some one please look at my pics off my clutch to see if there is anything wrong? Also if it is still useable?
Mileage on clutch (ACT 2600) had about maybe 15,000-20,000 miles with about two dozen track launches in about 6 years. Flywheel has been resurfaced to proper step and has about 2,000 miles.
Trying to determine why it is hard for me to shift in any gear. Yes I did adjust the clutch pedal to proper spec per jacks video. Also replaced both clutch and master cylinder before dropping the trans.
The best way I could shift somewhat was adjust clutch pedal far out of spec with about a couple threads left on the rod and even with that I had clutch dragging at about 3-4k rpm.
Any help is appreciated. Thinking about getting a South bend clutch.
Thanks
Pics:
http://www.dsmtuners.com/forums/dri...-gears-pulled-transmission.html#post153418787
Mileage on clutch (ACT 2600) had about maybe 15,000-20,000 miles with about two dozen track launches in about 6 years. Flywheel has been resurfaced to proper step and has about 2,000 miles.
Trying to determine why it is hard for me to shift in any gear. Yes I did adjust the clutch pedal to proper spec per jacks video. Also replaced both clutch and master cylinder before dropping the trans.
The best way I could shift somewhat was adjust clutch pedal far out of spec with about a couple threads left on the rod and even with that I had clutch dragging at about 3-4k rpm.
Any help is appreciated. Thinking about getting a South bend clutch.
Thanks
Pics:
http://www.dsmtuners.com/forums/dri...-gears-pulled-transmission.html#post153418787