The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Am I wiring this relay wrong?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

but

10+ Year Contributor
190
0
Apr 7, 2009
Ridgecrest, California
I am wiring up a relay and switch to control my fan.

I have the wire from the toggle switch to pin 87.

I have the the fan positive to pin 85, and the fan ground to pin 86.

I have a fused wire from the pattery to pin 30.

I turn the switch on and it illuminates,but the fan does not click on.

any suggestions?
 
Yeah, you've got it wrong.:toobad: You need to have the fused power coming in on 85. Then take 86 and run that to your switch. Next take the other side of the switch which is left and run that to a ground. Now take another fused power wire to 30 and hook the fan positive to 87. Finally run the fan negative wire to ground and you should be good to go.:) Good luck
 
Last edited:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top