boost gauge problems

[Shipe12]

I installed a 16g turbo and my aftermarket boost gauge stopped working it was hooked up the same as it was before i dont know what happened any help would be appreciated. Thanks

 

[4g63tcrazy]

Have you checked all the hose connections? Are you still using the plastic nylon hose? What brand of gauge? Where do you have the gauge tapped into?

 

[Shipe12]

It is a autometer phantom series. It was tapped in between the wastegate actuator and the solenoid when i got the car and thats were i left it. It worked fine with the stock turbo and when i did the swap i hooked it up the same way and it does not register any boost.

 

[Shipe12]

yes when i get home i am planning on trying it in different spots. i was just looking for some answers on where to tap it in at. It just seems weird as how it doesnt work anymore from where it was at.

 

[icekilla126]

tap between the intake and fuel pressure seleniod.

 

[->PrOjEcTGS<-]

tap between the intake and fuel pressure seleniod.

+1

The plastic line probably popped off out of the rubber T that is supplied with the gauge. Put some zip ties around the connection and you won't have a problem again.

 

[Shipe12]

Thanks all is good when i hooked it up from the intake mani to the solenoid thanks alot.

But i do have 1 more concern sometimes it will blow off and the guauge says 0 it wont be a powerful blow off but you can hear it i was wondering if this is normal?

 

[4g63tcrazy]

Yes that is normal. Your not producing alot of boost to blowoff but there still is some. So when the bov opens it only blows off a little bit of air compared to when your at full boost.

 

[Shipe12]

Ok cool thanks alot looks like a hard weekend of work is finally over and i can drink some beer and eat some wings and watch some football! haha