| Dead End Threads Threads that have been locked and/or have been determined to be not up to site standards. If your thread ends up here, you did something wrong. |
05-17-2008, 08:28 AM
|
#1 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
No BOV?
I was just thinking. What would happen if you did not have a BOV/ Rec. Valve? Like if the piping was solid. Would it way over pressurize the IC Piping? The intake manifold? Does anyone have any insite to this? Or ever thought about it as well?
|
|
Offline
|
|
05-17-2008, 08:35 AM
|
#2 (permalink)
|
|
Proven Member
From: HP, North Carolina
Region: Mid Atlantic
Registered: Nov 2003
Posts: 1,013
Reputation: 
|
Depends. You could get away with it in an auto drag car, but on a street car (5spd, or auto) everytime you let off the gas, the throttle plate would close sending the air rocketing back towards the compressor. For a street car, you would ultimately be risking damaging your turbo.
____________________________
98 GSX A/T
Jake
|
|
Offline
|
|
05-17-2008, 08:48 AM
|
#3 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
Let say your running 20+ psi you don't think it would do any damage to the throttle plate?
|
|
Offline
|
|
05-17-2008, 08:54 AM
|
#4 (permalink)
|
|
Proven Member
From: Columbus, Nebraska
Region: Midwest
Registered: Jul 2007
Posts: 311
Reputation:
|
20+ psi would probably not damage the throttle plate but the pressure from the turbo still compressing could force open the throttle plate open. The only turbo systems that do not use BOV's are the STS turbo systems and they are only running 8 psi.
____________________________
Morgan, bought car for $300.
|
|
Offline
|
|
05-17-2008, 08:59 AM
|
#5 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
So if it was to force the plate open it would then inturn make it as if the throttle was stock?
|
|
Offline
|
|
05-17-2008, 09:05 AM
|
#6 (permalink)
|
|
Proven Member
From: Centralia, Illinois
Region: Midwest
Registered: Apr 2008
Posts: 478
Reputation:
|
If it forced the throttle plate open it would be just as if you pressed in the pedal. Could be dangerous. Could surge into a building, sign, car, person.... "lawsuit"
|
|
Online
|
|
05-17-2008, 09:06 AM
|
#7 (permalink)
|
|
Proven Member
From: Gresham, Oregon
Region: Pacific Northwest
Registered: Mar 2007
Posts: 682
Reputation:
|
What? Throttle plate? No, it can't blow open the throttle plate. The throttle plate has equal pressure distribution on both sides, it's not going to rotate.
It can cause compressor surge, which can damage your turbo. The late 80's to early 90's dodge cars with the intercooled 2.2l engine did not come with a BOV, except in rare cases. Rarely do these turbos fail, however they are only pushing 10-13psi in stock trim. The more boost you push the more damage surge can do.
Bottom line, you can do it, it's not recommended. When you start getting the puff puff puff sound when you lift the pedal, know your turbos life is being shortened by an unknown amount.
____________________________
Tom - '90 Talon on blocks!
|
|
Offline
|
|
05-17-2008, 09:08 AM
|
#8 (permalink)
|
|
Proven Member
From: Woodstock, Illinois
Region: Midwest
Registered: Jun 2007
Posts: 61
Reputation:
|
Your going to compressor surge like hell, A buddy and I once trashed an old Probe GT turbo, made a solid pipe from the turbo directly to the TB bypassing the intercooler and not running a BOV and beat the shit out of it at 20PSI, I really dont think you risk forcing the butterfly open, rather creating alot of backspin on your turbo, especially since its going to take the path of least resistance its going to go wherever possible meaning back into your turbo and out the inlet
|
|
Offline
|
|
05-17-2008, 09:19 AM
|
#9 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
So no one thinks it could blow the IC piping off with 15 or more psi?
|
|
Offline
|
|
05-17-2008, 09:33 AM
|
#10 (permalink)
|
|
Proven Member
From: Gresham, Oregon
Region: Pacific Northwest
Registered: Mar 2007
Posts: 682
Reputation:
|
Yeah, you probably could blow the IC piping off, but that's less likely than the pressure surge that will for sure happen.
____________________________
Tom - '90 Talon on blocks!
|
|
Offline
|
|
05-17-2008, 09:40 AM
|
#11 (permalink)
|
|
Proven Member
From: White Oak, Pennsylvania
Region: Tri State
Registered: Apr 2005
Posts: 73
Reputation:
|
I'm quite curious why you would not want to run a blowoff valve? It helps lengthen the life of your turbo. 
|
|
Offline
|
|
05-17-2008, 09:42 AM
|
#12 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
But even with not being on the gas(like between shifts) the is still exhaust pressure, which would be turning the turbo in one direction. So it would still be building pressure.
|
|
Offline
|
|
05-17-2008, 09:47 AM
|
#13 (permalink)
|
|
Proven Member
From: White Oak, Pennsylvania
Region: Tri State
Registered: Apr 2005
Posts: 73
Reputation:
|
It's not building boost though... I still haven't figured out why you do not want to run a blowoff valve. It will prevent you a headache in the future. 
|
|
Offline
|
|
05-17-2008, 09:48 AM
|
#14 (permalink)
|
|
Proven Member
From: Taylorsville, Utah
Region: Rocky Mountain
Registered: Sep 2007
Posts: 141
Reputation:
|
If you do this you are a complete idiot. After upgrading to a front mount i didn't run a BOV for about a week. After that week say good bye to the turbo. i was running 22lbs. There is no cons of running a blow off valve. If you like buying a new turbo every couple off weeks then go ahead and run without it. Other wise don't try and reinvent the wheel. Do what is proven and run a BOV
|
|
Offline
|
|
05-17-2008, 09:55 AM
|
#15 (permalink)
|
|
Proven Member
From: Elkridge, Maryland
Region: Mid Atlantic
Registered: Dec 2004
Posts: 1,229
Reputation:
|
Quote:
Originally Posted by whitetsi95
So no one thinks it could blow the IC piping off with 15 or more psi?
|
I think you're missing the whole point. The issue with not having a blow-off won't have to do with your throttle plate or intercooler piping but rather on the turbo side. As other have stated, compressor surge will be extremely high which would cause air to rush back through the compressor wheel, very possibly causing turbo damage with time as well as experience a bigger turbo lag in between shifts.
With that said, it's a very bad idea to not have a fully functional blow-off valve.
Quote:
Originally Posted by whitetsi95
But even with not being on the gas(like between shifts) the is still exhaust pressure, which would be turning the turbo in one direction. So it would still be building pressure.
|
Incorrect. When the throttle is closed, no exhaust gases are produced, therefore no exhaust pressure is driving the turbo, it is still spinning only due to inertia.
Last edited by Defiant : 05-18-2008 at 04:14 AM.
|
|
Online
|
|
05-17-2008, 10:10 AM
|
#16 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
I don't want to run one. I was just wondering. I have been at work for a while and was bored. Just wondering what would happen.
:EDIT: I ment to say I am running one.
Last edited by whitetsi95 : 05-18-2008 at 01:24 AM.
|
|
Offline
|
|
05-17-2008, 10:13 AM
|
#17 (permalink)
|
|
Proven Member
From: Yuma, Arizona
Region: Southwest
Registered: Dec 2007
Posts: 50
Reputation:
|
Quote:
Originally Posted by marcmsj
Incorrect. When the throttle is closed, no exhaust gases are produced, therefore no exhaust pressure is driving the turbo, it is still spinning only due to inertia.
|
But when you let off the throttle wouldn't it bring the engine down to an idle? Which would still have exhaust going through the turbo.
|
|
Offline
|
|
05-17-2008, 10:22 AM
|
#18 (permalink)
|
|
Proven Member
From: Taylorsville, Utah
Region: Rocky Mountain
Registered: Sep 2007
Posts: 141
Reputation:
|
This conversation is pointless.......
|
|
Offline
|
|
05-17-2008, 10:22 AM
|
#19 (permalink)
|
|
Proven Member
From: Elkridge, Maryland
Region: Mid Atlantic
Registered: Dec 2004
Posts: 1,229
Reputation:
|
Quote:
Originally Posted by whitetsi95
But when you let off the throttle wouldn't it bring the engine down to an idle? Which would still have exhaust going through the turbo.
|
Yes, but not under deceleration. And at idle, the turbo is spinning but not creating boost. Either way, what's the point you're trying to make? The blow-off valve is closed at idle
|
|
Online
|
|
05-17-2008, 10:24 AM
|
#20 (permalink)
|
|
Proven Member
From: Elkridge, Maryland
Region: Mid Atlantic
Registered: Dec 2004
Posts: 1,229
Reputation:
|
Quote:
Originally Posted by whitetsi95
I don't want to run one.
|
Then don't, but you've been warned of the consequences. You'll be listening to your turbo flutter in between shifts, that flutter sound is your turbo cursing your mother.
|
|
Online
|
|
05-17-2008, 10:27 AM
|
#21 (permalink)
|
|
Proven Member
From: Taylorsville, Utah
Region: Rocky Mountain
Registered: Sep 2007
Posts: 141
Reputation:
|
|
|
Offline
|
|
05-17-2008, 05:35 PM
|
#22 (permalink)
|
|
Proven Member
From: Worcester, Massachusetts
Region: New England
Registered: Sep 2004
Posts: 2,224
|
These types of threads just make me giggle on the inside. 
____________________________
-Anthony-
|
|
Offline
|
|
05-17-2008, 07:41 PM
|
#23 (permalink)
|
|
Proven Member
From: HP, North Carolina
Region: Mid Atlantic
Registered: Nov 2003
Posts: 1,013
Reputation: 
|
There is a lot of misinformation in this thread.
First of all, if a car is cranked, exhaust gases are being produced. Under idle, accel, or decel, doesn't matter.
Even with a blowoff valve, when the throttle plate closes, the air is going to still rush towards it and hit it. That is what actually sends the air back to the turbo. The bov will divert this air to the air or back to the intake preventing it from reaching the compressor.
--------------------------------------------------------------------------------------------------------------
End of thread
____________________________
98 GSX A/T
Jake
|
|
Offline
|
|
|